Ender 5 Extrusion Caps - Front Bar Removal!

Extrusion_Caps_V2.step

Voron Hex Pattern StealthBurner Toolhead

Voron_Hex_StealthBurner_V2.stl

Neptune 3 Pro - Gantry Cable Mount - NO MORE DRAGGING!

Neptne_3_Cable_Mount_V2.step

BigTreeTech U2C Mount - CAN we do it?! Yes, we CAN!

BTT U2C VHB v2.step

Voron 0.2 Side Skirt w/ Ports! USB & RJ45 for your V0.2

Voron_Side_Skirt_Ports_V1.step

Voron DIN Rail SSD Mount

Voron_DIN_SSD_Mount_V1.step

BTT Pico Board Mount for Voron V0.1

Voron_V0_BTT_PICO_v2.step

Anycubic Kobra Max Printhead Cover Remix

This is a remix of Jmperou's original (https://www.thingiverse.com/thing:5380573) design the only thing I altered was the screw hole circumferences so that I do not have to use threaded inserts. All of the sizes were adjusted to accept the original hardware that comes with the Anycubic Kobra Max. I have tested this on my printer and have not had any issues. I printed this remix in PLA without issues any material will work. Major props to Jmperou for an amazing file, it is an amazing replacement to the original housing. Especially if you snap the original housing like I did and can't find a replacement on Anycubic's site.

I printed at 0.2 resolution smaller resolutions will work not sure on bigger resolutions.

Extruder Mount Bracket for 2020 Extrusion

Extruder_Mount_V2.step

Anycubic i3 Mega | Bed Wire Strain Relief

bed_strain_relief.stl

Kingroon KP3S-3Dtouch 2

KP3S-3Dtouch-2.STL

Bed Knob v2.stl

Bed Leveling Knob. Larger and easier to turn than the stock knobs most printers have. I made this for my Anet A8+ which is a Prusa i3 MK2 clone. Pretty sure it is quite similar to an Ender 3 as well. 

It fit a 4mm nut (outside dimension 7MM slot) The hole for the screw depending on your printer and print quality might need to be widened a bit. Easy done with a awl or a heated screw to melt through.

I printed this face down with no supports, 0.2mm nozzle, 50% infill throughout, and 80% infill around the nut slot for added strength. 

3D Printer Parts

Trending this Week

Categories

Trending

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Ender 5 Extrusion Caps - Front Bar Removal!

Voron Hex Pattern StealthBurner Toolhead

Neptune 3 Pro - Gantry Cable Mount - NO MORE DRAGGING!

BigTreeTech U2C Mount - CAN we do it?! Yes, we CAN!

Voron 0.2 Side Skirt w/ Ports! USB & RJ45 for your V0.2

Voron DIN Rail SSD Mount

BTT Pico Board Mount for Voron V0.1

Anycubic Kobra Max Printhead Cover Remix

Extruder Mount Bracket for 2020 Extrusion

Anycubic i3 Mega | Bed Wire Strain Relief

Kingroon KP3S-3Dtouch 2

Bed Knob v2.stl

9MM Bore - ExtrudAlign(tm) - Bushing Supported

5MM Bore - ExtrudAlign(tm) - No Bushing

3MM Bore - ExtrudAlign(tm) - No Bushing