Friendly Articulated Slug with hidden magnets

I used 2 magnetics (6x3mm).
With a layer height of 0.2mm you should set up a pause at layer 19.

The last to parts of the slug are not movable because of the magnets.
The slug is 150% scaled because of the magnets.
You should print with less weight, for e.g. 0% infill and not more than 2 walls.

Magnetics that I used: https://www.aliexpress.com/item/32951137017.html?spm=a2g0o.cart.0.0.22783c00OsamVW&mp=1

If you don't have a 3D printer, I sell it on Etsy: https://www.mikebayer3d.etsy.com

The original design is from _Isaiah_
https://www.thingiverse.com/thing:4727448

Follow me on social media:
[Facebook](https://www.facebook.com/Mike-Bayer-3D-Druckservice-108801391734722 "Facebook")
[Instagram](https://www.instagram.com/mikebayer3d/ "Instagram")
[Pinterest](https://www.pinterest.de/mikebayer3ddruckservice/ "Pinterest")
[Twitter](https://twitter.com/MikeBayer3D "Twitter")
[Printables](https://www.printables.com/social/244886-mike/prints "Printables")
[Cults3D](https://cults3d.com/en/users/mrmbmrmb/creations "Cults3D")
[Thingiverse](https://www.thingiverse.com/mrmbmrmb/designs "Thingiverse")

etsy Shop:
[etsy](https://www.mikebayer3d.etsy.com "etsy")

Happy Halloween Articulating Spine

This print-in-place “Happy Halloween” spine is fun to print and feels really weird to hold and move. 
See here for video: https://youtu.be/1uJ-5xu7dJw 
The spine must be printed as oriented, with the spinous processes point up. Changing the orientation of the file will result in improper printing of the inner ball joint between adjacent vertebrae.
The transverse processes that stick out sideways do not need support. Therefore, you only need to support the base of the vertebral bodies and the top loop. 
You’ll have to plan your support well in order to adequately support the curved bottom surface of the vertebral body. A suggested technique using Cura is to raise the object of the build plate by 3mm, and then add tree supports underneath. Switch “Support distance priority” to “xy overrides z” and tighten up the “xy support distance” to 0.1mm. 
After printing there will be some small adhesions on the inside ball joint and in the facet joints. Just do some gentle spinal mobilization and they will release and move freely. Be sure to let your print fully cool first! If the plastic is still soft, the connector may break when you try to move it.


Tiny Octopus

Cinderwing3D_Tiny_Octo.stl

Cthulhu picture nook

Cthulhu.stl

Paper Towel Holder Style 1

Paper Towel Holder Style 1 Large.STEP

Tentacle Controller Stand

Tentacle_Controller_Stand-Holoprops.stl

SX07 - Sci-fi Storage Box (decorational)

Top Clamp.stl

8 mm, Small Thread Hole, Nut

8 mm, Small Thread Hole, Nut.stl

Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


Pearl Wall Light

Pearl Wall Light.stl

Filament Friday CHEP Cube

This larger 50mm square CHEP Cube has a new FIlament Friday Logo on the side for more testing of your printers ability to create letters and graphics.

King Size Cone FIller (100)

100ConeBox.stl

The Kita  Lamp | Modern and Unique Home Decor for Desk and Table

KITAMAIN.stl

Coaster Planter

Coaster Planter.stl

The Portal 

portal-magic-supported.stl

BABY YODA SOUP

Gridfinity 1x1 2032 (x7) and LR44 (x5) Battery Holder

Sure, I know there are better, more robust Gridfinity button-cell battery holders out there. Of course there are. But this one matches my PARTICULAR use case. I only use these two sizes on the regular, so why not make an incredibly specific holder for them? Maybe you need this exact configuration too? I don't know! Here it is just in case.

This Gridfinity module can hold five (5!) LR44/SR44 batteries, and seven (7!) 2032 button-cell batteries! I designed it so that none of the batteries touch. That's important to me because they're quite easy to accidentally short. 

#Gridfinity

Chibi Pokemon Collection #2

UMBREON.stl

Gridfinity model paint organiser

For all you model makers / painters out there I've designed a 3x3 #gridfinity organiser to keep your model paints and paint brushes tidy. There are 3 different size of paint brush holders. Enjoy!

Mushroom shelf “Fomes Fomentarius”

fomentariusfungus_shelf_default.stl

2

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Friendly Articulated Slug with hidden magnets

Happy Halloween Articulating Spine

Tiny Octopus

Cthulhu picture nook

Paper Towel Holder Style 1

Tentacle Controller Stand

SX07 - Sci-fi Storage Box (decorational)

8 mm, Small Thread Hole, Nut

Skull Pop Beads

Pearl Wall Light

Filament Friday CHEP Cube

King Size Cone FIller (100)

The Kita Lamp | Modern and Unique Home Decor for Desk and Table

Coaster Planter

The Portal

BABY YODA SOUP

Gridfinity 1x1 2032 (x7) and LR44 (x5) Battery Holder

Chibi Pokemon Collection #2

Gridfinity model paint organiser

Mushroom shelf “Fomes Fomentarius”