Faceted Pencil Holder (Vase Mode) 

Faceted Pencil Holder by Slimprint.stl

Spiral Cup Office Organizer

Introducing the Spiral Cup Office Organizer!

While experimenting with shapes in Fusion 360, I stumbled upon this design that practically created itself! Despite its steep angles, this model can be printed without any supports. Plus, it's both stylish and functional, making it the perfect addition to any workspace.

I sincerely hope that you enjoy using this model as much as I enjoyed creating it. If you want to support me in a simple way, please consider liking, downloading, and sharing this model with your friends.

Timelapse: https://www.youtube.com/watch?v=yblvp8IZw44

Print Settings:

Material: PLA or PTEG (or similar…)
Layer Height: .2
Infill: 15%
Walls: 2
Supports: No
Change filament during print: Yes for aditional style ;)
Brim: No
Raft: No
All models are print ready oriented.


CopoEspiralTriangular.stl

Peep Bunny -"Thang Holder"

PeepBunny-thingHolder_Short.stl

Tablet Stand with Pen Holder

Tablet Stand with Pen Holder

Best printed on the side with the pen holder on the build plate.

No supports needed.

Revolver_Ring.stl

This is a ring that can be used with the Revolver Caddy on thingiverse, thing https://www.thingiverse.com/thing:2997593.  The base does not print with a way to hold the revolver caddy in place if you pick it up. There are two ways to use the ring.  Print and Glue after attaching the caddy.  Or in your slicer attach as a part, align and attach the ring at the very top of the base stl. Then in your slicer add a pause command at approx layer 77. This will give you a chance to remove the caddy from your print bed if you are printing on the same bed (Otherwise print the items separately but wait to print the base until the Caddy is finished. Then add lubricate per thingiverse instructions then place on the base. Resume your printing and then the ring will print in place and finish of the print nicely with a way to lift the unit without separating.

Oreo Cookie Pen Holder

Batarang Pen Holder

Wacom Pen Holder Skull - Desk Ornament

Wacom Pen Holder Skull - Desk Ornament
If you like my work find more here - https://www.myminifactory.com/users/printedobsession
if you want to support my work consider joining patreon - https://www.patreon.com/printedobsession
want to know more about my process? i have tutorials on youtube - https://www.youtube.com/c/PrintedObsession

CC BY-NC-ND
This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is given to the creator.


Chain Link Gridfinity Bin 100mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm:


Chain Link Gridfinity Bin 80mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


2023 Pen Holder

Halloween Pumpkin Pen Holder – Jack Skellington Inspired

This is a Pen Holder inspired by a Pumpkin and Jack Skellington face.

It's easy to print, you only need supports if you want to preserve the details on the face. I recommend using Tree Supports to avoid problems during the extraction.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

Halloween Pen Holder

Drawer Organizer

it fits a 13mm wall drawer and 155mm depth , but you can scale it down or up to fit yours .
You can see how i made it here https://youtu.be/fE0PEKFciZo

Turtle shell pen holder

no need to scale it up or down fits as is

Dragon pen holder

A cute little dragon to hold your pens, pencils, and whatever else you need!

This was modeling practice for me. I wanted to create something cute but also act as a bit of desk decor. So here we have the pen holder dragon

 

This is a print that can be done without any supports, although that might depend on your printer settings. Please print in the full size as uploaded, unless you just want a toothpick holder. 

Should work well with most materials, but make sure to adjust your retraction for any stringing due to the horns or wings. 

Pot Planter Vase 002 Pen Holder

Designed in Fusion 360 for a specific plant I had that didn't have a pot.

Pot 002.stl

Gridfinity 0.5 Wide Pen Holder

My drawer does not fit the Gridfinity baseplate evenly so I created this funny-looking oddity. This fits in my last half grid space. You can technically place two of these side by side or just print a 1 x 4 with two pen slots. 

0.5 x 4 pen holder.stl

Pencil holder

Pencil holder_V2.STL

castle tower pen holder

castle tower pen holder


**printing settings** 
nozzle: 0,4 
layer height: 0.2 
wall line count: 2 
infill: 10% 
support: no 
this model is licensed under_[ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.](https://creativecommons.org/licenses/by-nc-sa/4.0/)_ 
happy printing

Pen holder

A 3D printable pencil holder with square texture.

Enjoy and have fun 3D printing!

,pen holder

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Faceted Pencil Holder (Vase Mode)

Spiral Cup Office Organizer

Peep Bunny -"Thang Holder"

Tablet Stand with Pen Holder

Revolver_Ring.stl

Oreo Cookie Pen Holder

Batarang Pen Holder

Wacom Pen Holder Skull - Desk Ornament

Chain Link Gridfinity Bin 100mm

Chain Link Gridfinity Bin 80mm

View 10 new models

Halloween Pumpkin Pen Holder – Jack Skellington Inspired

Drawer Organizer

Turtle shell pen holder

Dragon pen holder

Pot Planter Vase 002 Pen Holder

Gridfinity 0.5 Wide Pen Holder

Pencil holder

castle tower pen holder

Pen holder