12oz Soda, Beer, Can Koozy, designed like a large wire nut! 

Wire Nut Can Cup V1.stl

Shooting Star

Shooting_Star_AMS.stl

Kaleidoscope 2 Christmas Bulb 2024

Bulb Kaleidoscope 2.stl

Snoopy hugging Woodstock Christmas Tree Ornament

snoopyhuggingwoodstockornament.3mf

MRS and MR Christmas Gnome

Mr Christmas Gnome 3MF.3mf

Lattice Christmas Stretch Ornament 2024

Stretch Lattice 2.stl

Christmas Tealight Box

Christmas Box.stl

Egg shaped ornament

egg-110l.stl

Tealight Icicle Ornament

Display only do not print.stl

CHRISTMAS TREE - PENDANT

Easy to print model for Christmas decoration!
Just put a little rope over and its done!



Cat Head with Scarf Ornament / Multiparts / Multicolor / No Supports

Multicolor - Head with Nose - For Scarf.stl

Gingerbread Cookie Ornaments Set 1

GingerbreadOrnamentSet1-3Color3mf-FunFam3D.3mf

 Christmas Snoopy with Santa Hat Tree Ornament

snoopychristmasornament.3mf

Articulated Nutcracker with Swinging Arms and Stand-Up Base :: Classic Christmas Toy

Swing-Arm Soldier DEC + PLAT3D.stl

Grand Kaleidoscope Teardrop Ornament

Grand Kaleidoscope Teardrop v3 Whole.stl

Car with Christmas tree wallart

christmas_tree_car.stl

A Rockin' Christmas Card

SantaWithGuitar.stl

Cone ornamernt

cone.stl

ZigZag Christmas Ornament

##Not to Be Sold
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

##About the Design
This is an elegant abstract sculpture masquerading as a Christmas ornament. It almost seems to change shape as you rotate it in different directions.

This ornament prints well with just a single perimeter. That makes it very light and lets the most light through is you use transparent/translucent filament. In fact, it positively glows. It also looks amazing printed with bichromatic or trichromatic filaments. 

The print shown in clear was printed with Matterhackers Transparent PLA. They were printed on an AnyCubic Mega S and sliced using Cura. I'll be adding pictures soon that show the ornament printed with Matterhackers Quantum Raspberry Gold and Translucent Blue printed on a Prusa MK3S+ sliced using PrusaSlicer.

##Resizing
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

##Print Time
About 5 hours

##Print Settings
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm.

*Infill*
Using PrusaSlicer, you won't need infill. Just set top and bottom to 1 layer and minimum shell thickness to 0.15 mm. That will keep the ornament light (about 13 grams) and will let the most light through if you use translucent/transparent PLA. 

If you use Cura, I would use support blockers set to 1-3 layers high to add infill just in those areas that are unsupported.

*Speed*
With PrusaSclier, I used the default speed settings for my printer and generic PLA. In cura, I used:
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel Speed: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees (Cura) and 67 (PrusaSlicer)

Recessed Ball Ornament

RetroMaker Recessed Ball Ornament.

Creative Commons License BY-NC-ND 4.0

RetroMaker Recessed Ball Ornament

,christmas

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

12oz Soda, Beer, Can Koozy, designed like a large wire nut!

Shooting Star

Kaleidoscope 2 Christmas Bulb 2024

Snoopy hugging Woodstock Christmas Tree Ornament

MRS and MR Christmas Gnome

Lattice Christmas Stretch Ornament 2024

Christmas Tealight Box

Egg shaped ornament

Tealight Icicle Ornament

CHRISTMAS TREE - PENDANT

Cat Head with Scarf Ornament / Multiparts / Multicolor / No Supports

Gingerbread Cookie Ornaments Set 1

Christmas Snoopy with Santa Hat Tree Ornament

Articulated Nutcracker with Swinging Arms and Stand-Up Base :: Classic Christmas Toy

Grand Kaleidoscope Teardrop Ornament

Car with Christmas tree wallart

A Rockin' Christmas Card

Cone ornamernt

ZigZag Christmas Ornament

Recessed Ball Ornament