Straighten out your workshop with Gridfinity modular storage - deploy these plates anywhere you need some order! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more

Designed to work with storage modules from the Gridfinity system by Zack Freedman. These racks are stackable, with small tabs to aid in both horizontal and vertical alignment. I had these windowed d

Versatile open-top storage blocks for the Gridfinity modular workshop storage system - multiple sizes for infinite options! Gridfinity is the ultimate organizer for your whole workshop! Learn more at

A 2x3 Gridfinity container that holds 9 x 7.4ml Testors paint jars. These are stackable.

This is a remix of the Gridfinity Modular Drawer System that fits onto the Multibpard. I created a Peg with a slider on it and added slots to the back of the Gridfinity MDS so it can slide on and off

Simple Gridfinity bins with one wall missing. This allows you to slot in larger tools that still need a place. I use these for my pneumatic nail guns and staple guns.

3D printing accessories for the Gridfinity modular workshop system - store tools, nozzles, and more! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity

Gridfinity bulk storage of drills from 1.5mm to 10mm in 0.5mm intervals. good for compact storage of all your spare drill bits.

Designed to interface with Zack Freedman's #Gridfinity system. Dedicated spots for bulk AA, bulk AAA, AAAA, 2032 (CMOS battery), A97/LR44/Other (Calipers, etc.), 18650 and 9-volt batteries. Prints wel

1x1 Gridfinity compatible tool holder to consolidate many of the stock Ender 3 & Ender 3 Pro tools. Includes spaces for: All five allen wrenches (1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm) Small screwdri

Gridfinity Dremel bit holder

A space for your allen wrenches in the gridfinity setup. 2 blocks. Thanks, Zack!

Do you hate those spools of silicon wire that unwind themselves the millisecond you take them out of the horrible cardboard box they come in? I know they're in the box for a reason, but they're ugly a

This item is for use with the #GridFinity system by Zach Freedman: https://www.youtube.com/watch?v=ra_9zU-mnl8 This is a 4 unit wide by 1 unit deep by

The Multiboard Mounted 2x2 Gridfinity Baseplate is suitable for holding The Gridfinity Post-It Note Holder or any other 2x2 mounted accessory. Print upright with no supports at 0.2mm layer height wit

Cable storage bin with 10 18mm wide compartments, to fit various size USB or other cables. Fits USB cables up to 10ft length depending on diameter. Base is Gridfinity compatible 42mm squares (2x5), bu

This is a router bit holder that fits into the Gridfinity ecosystem. 10% infill is plenty strong

Stash your measuring bois on your Gridfinity modular workshop storage system, Excalibur style. Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity acces

Compatible with Gridfinity system by Zack Freedman. Alex drawers from the famous swedish furniture brand are 7x12x8 in gridfinity measures. So you can use any grid 7x? and print any bin shorter or eq

Socket organizers and ratchet holders for the Gridfinity modular workshop storage system! Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories

Safely grab the right tool with the Gridfinity modular workshop storage system! Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8

WORK IN PROGRESS! To be used with IKEA ALEX drawers! Inspired by Pey's designs on Printables: https://www.printables.com/model/213778 Gridfinity plates of 7x12 will fit very well width wise in ALEX

I built the boxes using https://github.com/benlaurie/gfdb this script by BenLaurie. This is all based on Zach Freedman's Gridfinity system. Love this system! I have included lots of sizes, with the

#gridfinity 1x2 block that holds a bunch of male USB things. Has: A lot of (N) USB A slots (N/2) micro USB slots (N/2) USB C slots

2x3x7.4mm Gridfinity Drawers. Tested in PLA, printed with body cavity facing upwards and with only tiny supports between the gridfinity rows on a Elegoo Neptune 2 model. Suggest minimal cubic infill

Various Gridfinity bins sized for common utensils and kitchen tools - designed with no stacking lips to make insertion/removal easier - as well as several custom bins (masher, tenderizer mallets, meas

#gridfinity chisel holders is make for a few different common shapes of wood working chisels.

Hex Bit Holder for the Gridfinity System this 3x1 module holds 46 hex bits **Please visit my Youtube Channel **https://www.youtube.com/c/DIYTINKERER [htt

This is a caliper holder for the #gridfinity system. The available ones are either too tall for drawers, or waste space. This one stands the caliper on it's side, saving maximum space. I didn't bother

Print two of these (one of them mirrored) and it should hold the majority of wrenches out there. Fit two sets of wrenches I own easily. FreeCAD model included.

1x1 Gridfinity block for storing up to 10 USB devices as well as 3 Micro SD cards. Simple design set up for fast printing. Recommended settings are as follows: Layer Height: .32mm Walls: 3 Infill:

Ever wished you could pack your gridfinitised workshop for some on-the-go action? Well this is a solution. I wouldn't call it the solution; its grossly overcomplicated, requires post processing, and h

At the risk of having my nerd card revoked, I'll admit that I just don't need space for 6 nippers, strippers, and/or pliers. Rather than waste space with unused bays, I chopped Zack's original file

Try the free 3D-printable game designed to make, mod, and master! These is the "starter kit" of prototype tiles for the Hextraction beta! Print whichever you want. I strongly recommend printing two t

A 1x1 unit that has 6 slots in it, 2.5 mm width, for holding rulers vertical in a drawer using the #gridfinity system. *Note, This unit is can be stacked on top of other units, but can't be stac

A Gridfinity adapter is nothing more than the bottom mating portion with a flat top surface. This enables you to fasten whatever you want to a Gridfinity system without needing to 3d model anything sp

A comprehensive assortment of Gridfinity divider bins based on the OpenSCAD implementation of Zack's original design. The parent project is located here: https://github.com/vector76/gridfinity_opens

#gridfinity small file holder is designed for keeping your small files or other small tools organised. Designed to fit into a common tool chest drawer.

This is a parametric #gridfinity compatible shelf forthe honeycomb storage wall: https://www.printables.com/model/152592-honeycomb-storage-wall The model is written in CadQuery, and the source code i

Sometimes you just need a spot to throw a thing. Throw your things in these boxes! It's just the template from https://thangs.com/designer/KptnAutismus/3d-model/Gridfinity Templates (Filled in and Ho

These single unit Gridfinity bins are designed to be printed in “vase” or “spiralized” mode. Spiralized mode is the best option to use with clear filament to get transparent walls. Spiralized printing

This is a 1x1 Gridfinity module for 14 Hex bits Gridfinity system by** Zach Freedman** please visit my Youtube Channel [https://www.youtube.com/c/DIYTINKERER](https://www.youtube.com/c/DIYTINKER

#Gridfinity compatible card storage. Stores up to 18 USB A, 18 micro SD, 13 SD, 3 USB C, 1 CFexpress type A, 1 CFexpress type B, or 1 Compact Flash. Yes i know that its very tightly packed, you are no

This 2x2 unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes w

Gridfinity baseplate adaptation for Multiboard, parametric - with FreeCAD file. You will need a [Lattice2](https:/

This is a gridfinity compatible 3x1 holder for 11 spade bits. The bits are stored with a slight backward angle to them so they display better. D.I.Y. TINKERER [https://www.youtube.com/c/diytinkerer](

Gridfinity Holder for a Multiboard Snap.

Stackable storage for paints in dropper bottles such as Vallejo, Army Painter etc. Colors visible from side of boxes and easily seen from above. Base file works for Army Painter and Vallejo paints, bu

#Gridfinity compatible combined USB memory and SD/SD-Micro -card storage. Stores 7 USB memories/dongles or SD-Cards, or 2..3 Micro-SD -cards in space of each one USB/SD slot. Half-height, stackable w

A simple 1x1 bin (flat bottomed) for Gridfinity system. Note: not standard height so may interfere with stacking.