This is a filament painting of a Heron at Sunset. It was made by using Midjourney. Printed at 110x220 @ 2.64mm

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PrintBed Black

Printbed Red

PrintBed Orange

PrintBed White

ProtoPasta Party Sunny Yellow

Swap Instructions:

Black until layer #6 at 0.56mm Red until layer #12 at 1.04mm Orange until layer #21 at 1.76mm Yellow until layer #24 at 2mm White for the rest.