As with the other Annoying Boxes, there's nothing tricky about this gift box, its just simply...annoying. I created this design after getting requests to make a smaller, stocking stuffer sized annoying box. The other big difference is the much longer bolts!

Total print time on my Bambu X1C was 3.5 hrs, and total internal size of the box is 66 mm x 66 mm x 57 mm.

It is scaled just about gift-card-size, so you can scale up as you want to fit bigger items.

Printing Info: These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, bolts likely won't work well if scaled down. Supports: None Infill/Perimeters: 15% infill + 2 perimeters, 3 perimeters for bolts. Nozzle Size: 0.4 Layer Height: 0.2

Printing & Assembly: No supports are needed for this model, just print the pieces in the orientation that they import and assemble after printing. The ribbon just screws into place, and the bolts obviously also screw into place to hold the lid on. You will need:

• 1 box
• 1 lid
• 1 ribbon
• 4 bolts

File List (13):

• mini_box (STL)
• mini_lid (STL)
• mini_ribbon (STL)
• bolt (flat head) (STL)
• bolt (phillips) (STL)
• bolt (5.5 mm hex) (STL)
• bolt (6 mm hex) (STL)
• bolt (security) (STL)
• screwdriver (flathead) (STL)
• screwdriver (phillips) (STL)
• screwdriver (5.5 hex) (STL)
• screwdriver (6 hex) (STL)
• screwdriver (security) (STL)