Hi friends, we have decided to create a new jewelry holder, with modern lines. Very easy to print.

The base is easily printed without supports, the same thing for the pins which are in different sizes, as you can see in the photos we have arranged them according to size but you can choose to form the composition you want. We recommend inserting the rods from the outside towards the inside.

You can print the base vertically. It also has a small recess where you can place the rings.

We printed everything with our bambulab p1s with white pla filament for the base and transparent purple for the temples. We decided to print the pins with only 3 perimeter lines and 0% infill, for a more pronounced glass effect and to save material. The filament is from the Amolen brand.

15% infill for the base is sufficient.

Hope you like it.

As always we thank you for the support you give us, if you like our designs follow us and support us also on our social pages (Instagram and tiktok, X) Shack3d_print. We will be happy to see the result of your prints, share the photos with us by tagging us on our social pages, don't be shy. Thank you very much.