This is an art piece made from an image of my popular cloud storage model. This was made using Hueforge.

🚨🚨🚨🚨🚨🚨

This model is for personal use only. If you want to sell physical prints of our designs, or you want to support us, please SUBSCRIBE TO OUR THANGS MEMBERSHIP PLAN : https://than.gs/u/161490?plans=true

🚨🚨🚨🚨🚨🚨

Print Instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: ASA PolyLite Black Transmission Distance: 0.3 ASA PolyLite Red Transmission Distance: 1.5 ASA PolyLite PolyMaker Teal Transmission Distance: 0.5 ASA PolyLite White Transmission Distance: 0.5

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #13 (1.12mm) swap to PolyMaker Teal At layer #16 (1.36mm) swap to White for the rest.