Alternates between left and right outputs when an adjacent tile is played.

Rules Setup: Must orient flipper left or right. On adjacent played: Fully rotate flipper. To clarify, "On adjacent played" is when a tile is played directly next to the Relay tile. This does not include moving, swapping, rotating, etc.

Hardware / Printing

• One M3x4 screw (or longer)
• One M3 washer
• Card variations available
• Filament change for aesthetics. On the base, at the start of the pattern. On the flipper, at the start of the star.

Assembly

1. Insert an M3x4 screw into the flipper, stack a washer on the screw, then install the flipper. Crank it down until it stops rotating freely.
2. Slowly back out the screw 1/8th of a turn. Repeat until the flipper can be rotated with your finger, but won’t be flipped by a fast ball down the center path.

This tile is part of my Mechanism Tiles Pack. Check the others out.

• Coin Flip https://than.gs/m/975594
• Gear Spinner https://than.gs/m/975606
• Lazy Susan https://than.gs/m/1249642
• Neo King https://than.gs/m/975604
• Relay https://than.gs/m/1327658
• Seesaw https://than.gs/m/975595