Tired of your charging cables laying all over the place, tripping over them at night? Why are you in the garage in the dark, at night??

The ⚡EV Charger Holder J1772⚡ is designed to hold an at home Level 2 EV charging plugs and cables nicely on the wall.

*NOTE: I have tested this with my General Motors Level 2 J1772 charger. Some designs may vary, so please let me know if you have any questions or have suggested adjustments.

FEATURES: • Compact Design • 2 screws stacked vertically for stud mounting • Also holds the cable • Also makes a great coat hanger

HARDWARE • Screws: x2 wood self tapping countersunk screws • Screw Driver / Power Drill • Stud Finder

INSTALLATION • I recommend installing the holder onto a wall stud if possible, otherwise use wall anchors to a solid hold.

• Hold the holder and screw the screw lol. Start with the top screw, adjust the hangers angle if needed, and install the lower screw.

PRINT SETTINGS Filament: PETG Nozzle Size: 0.4mm (3 perimeters), 0.6mm (2 perimeters) Print Height: 0.2-0.35mm Infill: 10-20%