| Visit JERRARI3D.com for Instructions and a complete look at the GEN2 collection

The GEN2 Tilt drawer is a heavy duty storage solution with incredibly quick and easy access to it's contents thanks to it's tilting opening. Rearrange the tilt drawers in seconds now thanks to the new QuickLock spring mechanism integrated into the drawer case.

Choose a Faceplate Download and customize faceplates HERE

STEP 1: Location

Decide how you would like to use your GEN2 storage. Keep in mind that the drawers are modular and can be easily swapped between under table and table top locations. All drawers are available for mounting under the table using rails, but you can also place them on top of any surface with table top kits.

Find these kits at JERRARI3D.com

• UNDER TABLE (GEN2 RAILS) Attach GEN2 drawers under any surface by installing the GEN2 RAILS. Once installed drawers can slide and lock into place, they can then be swapped out and rearrange in seconds. • TABLE TOP KITS Table Top Kits include covers and foot rails that when combined with drawer cases create a rigid structure that can be placed anywhere • WALL MOUNT KIT Mount GEN2 cases and drawers to almost any vertical surface using the GEN2 Wall Mount – Lite. Once installed, your layout is secure, modular, and easy to expand or rearrange anytime.

HARDWARE/TOOLS • Screw Driver • Wood Screws #8, 1.5" long or equivalent • M3x6 or longer machine screw

INSTRUCTIONS

PREP THE TILT DRAWER The New design of the drawers rely on using an M3 screw head to pivot on. This is significantly more stable and structural strong compared to previous designs.

• Inside the drawer pull M3 nuts into place, you may want to use a longer screw such as an M3x10 and then removing the screw

• Now thread an M3x6 (or longer) into place on each side of the tile drawer

Extra Features • Use the GEN2 QuickLock - Bidirectional to install the Medium drawer under longer drawer cases. When sliding the drawer into place you will need to help the bidirectional QuickLock by holding them down until they are started under the slot of the drawer or rail above.

v2508