Hey all! I came up with an idea for a series of fruit related HueForges. I like how the colors display on the wall, and think they look really good when printed with HueForge.

HueForge Settings

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 170x170mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 5 PLA PolyLite Beige Transmission Distance: 1.5 PLA PolyLite White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Beige At layer #21 (1.76mm) swap to White for the rest.