Mouth grabber

Body.stl

Flappy Head Dino - Hatchling

Hatchling FlappyHeadDino.stl

Tiny Candy

Cinderwing3D Tiny Candy Eye Candy Colors.3mf

Snappy Water Dino -  Hatchling

Hatchling SnappyWaterDino.stl

Tiny Winged Wolf

Cinderwing3D Tiny Winged Wolf Colors.3mf

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.

**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942802
**Medium Tolerance Extra Long Bony Basilisk:**
https://than.gs/m/942873

Please try out each to see what works best for you, and let me know which version you prefer!


Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

[Official Remix] Flexi Extra Size Cat (Print-in-place)

Holding-Cat_Extra-Size v1.stl

Giant Articulated Viper Snake 95cm / 37,4Inch - Flexi - Print in Place - No Supports

Snake2+.stl

Gnome ( Supportless )

Gnome n1 ( Supportless ) by BODY3D fix.stl

Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Long Bony Basilisk:**
https://than.gs/m/936921
**Medium Tolerance Long Bony Basilisk:**
https://than.gs/m/937050

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Long Bony Basilisk, be sure to check out it’s cute younger sibling, the Short Bony Basilisk:

**Tight Tolerance Short Bony Basilisk:**
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk:**
https://than.gs/m/937047
**Loose Tolerance Short Bony Basilisk:**
https://than.gs/m/937048

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Short Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

**Print-In-Place, No Supports, Articulating Fidget Toy**

Emerging from the crypts and cursed castles, the Bony Basilisk is here to bewitch and bedazzle just in time for the spooky season! With its detailed skeletal structure, this bony behemoth is prepared to perch on your shelf as the haunting highlight of your Halloween assembly or stand sentinel, casting a bone-chilling shadow for your guests.  This ancient creature refuses to let the ghosts, ghouls, and dragons have all the fall-time fun on their own.

This articulated fidget toy integrates the Mimetics 3D "Snap-Flex" joint. This allows the Bony Basilisk to both move smoothly, mimicking the fluid motion of living creatures, AND stabilize in a firm pose, providing a premium fidgeting experience. Each **SNAP** will resonate as a symphony of satisfaction to your ears, confirming your masterful manipulations.

This Bony Basilisk is the third creation in a series of Snap-Flex models by Mimetics 3D, and it's available for free for a limited time.


**Tolerance:**
To accommodate different printer settings and filaments, I’m uploading 3 different tolerance levels for the Bone Snake to ensure that you get the best fitting, most satisfying “SNAP” with each of your prints.

This is the **Loose** tolerance model.  For the other tolerances, please check out the other versions of the model below:

**Tight Tolerance Short Bony Basilisk: **
https://than.gs/m/936954
**Medium Tolerance Short Bony Basilisk: **
https://than.gs/m/937047

Please try out each to see what works best for you, and let me know which version you prefer!

**Other Models:**
If you like the Short Bony Basilisk, be sure to check out it’s more mature, older sibling, the :ong Bony Basilisk:

**Tight Tolerance Long Bony Basilisk: **
https://than.gs/m/936921
**Medium Tolerance Long Bony Basilisk: **
Coming Soon
**Loose Tolerance Long Bony Basilisk: **
Coming Soon

Make sure to revisit us frequently for more thrilling Snap-Flex models to come. We're eager to hear your feedback and collaborate on refining this model going forward.

This model is for personal use only. If you're interested in selling physical prints of this model, please subscribe to the Mimetics 3D Commercial Tier on Thangs.

**Print Settings:**
0.2mm Layer Height
3 Wall Loops
3 Top Shell Layers
No Supports, Print-In-Place at 100% scale.  Going any smaller may disable the Snap-Flex joint.

These tolerances are TIGHT and you'll likely have to snap each segment a few times before it's loose enough to snap/unsnap easily. I recommend you use regular PLA or PLA+. ABS might be even better, but I haven't tried it yet.

Silk PLA is a bit softer and may not click as nicely. I'd also be more concerned about silk PLA holding up to the wear and tear.
If you print this in resin, please let me know how it turns out. I imagine you would need a more flexible/less stiff resin for it to work appropriately.

Ducky Dino - Hatchling

Hatchling DuckyDino.stl

Baby Basilisk (Extra Long) - Articulated Snap-Flex Fidget (Medium Tightness Joints)

BabyBasilisk_V2_ExtraLong_MediumTightness.stl

Turkey - Cinder Hatchlin

Cinderwing3D Turkey Hatchling.stl

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Digital Store
Fidget

Most Popular of All Time

Categories

Popular

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Mouth grabber

Flappy Head Dino - Hatchling

Tiny Candy

Snappy Water Dino - Hatchling

Tiny Winged Wolf

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

[Official Remix] Flexi Extra Size Cat (Print-in-place)

Giant Articulated Viper Snake 95cm / 37,4Inch - Flexi - Print in Place - No Supports

Gnome ( Supportless )

Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Short Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Ducky Dino - Hatchling

Baby Basilisk (Extra Long) - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Turkey - Cinder Hatchlin

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Skeleton Dragon Keychain - Articulated, Print in Place - No Supports

Baby Cherry Blossom Dragon

Drakeon Articulated Dragon Mesh Mayhem

Dragon Axolotl V2

Moose - Cinder Hatchling

Digital StoreFidget

Most Popular of All Time

Categories

Popular

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Mouth grabber

Flappy Head Dino - Hatchling

Tiny Candy

Snappy Water Dino - Hatchling

Tiny Winged Wolf

Extra Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

[Official Remix] Flexi Extra Size Cat (Print-in-place)

Giant Articulated Viper Snake 95cm / 37,4Inch - Flexi - Print in Place - No Supports

Gnome ( Supportless )

Long Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Short Bony Basilisk - Articulated Snap-Flex Fidget (Loose Joints)

Ducky Dino - Hatchling

Baby Basilisk (Extra Long) - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Turkey - Cinder Hatchlin

Grim Reaper, Slim Reaper - Articulated Snap-Flex Fidget (Medium Tightness Joints)

Skeleton Dragon Keychain - Articulated, Print in Place - No Supports

Baby Cherry Blossom Dragon

Drakeon Articulated Dragon Mesh Mayhem

Dragon Axolotl V2

Moose - Cinder Hatchling

Digital Store
Fidget