Gumballs (All Teeth)

Gumballs Single Colour - All Teeth.stl

Bat Glasses || HalloweenWearable

Bat Glasses V1.0 - Frame.stl

Jason Bear

Here is the model for Jason Bear.

Jason is a good but scary Friend of Barry, and like his friend he seems to just want to be your friend (but i would keep an eye on him), do you have space for Jason? maybe he can keep Barry Company.

I printed mine using just a organic support under his chin and his machete arm and he came out great.

I hope you enjoy, and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffee

https://www.buymeacoffee.com/bugman140

Glow in the dark moons

waning-waxing crescent.stl

25mm Glow in the dark Star

This is the 3rd star in the collection of glow in the dark stars I have made for my friend. The are currently still printing but thought I would upload the models as I waited.

These are very simple and quick to print. Use glow in the dark filament and stick them to the ceiling!!


Copper Cauldron

Here is the file for the Copper Cauldron

its a simple Cauldron for Halloween that prints with Zero supports for your decorations.

I hope you enjoy.

and Happy Halloween

Thanks

Bugman

If you like what I am doing please consider buying me a coffee or tipping. 😁👍

Buy me a coffee

https://www.buymeacoffee.com/bugman140

 

Copper cauldron

Ghost Pop Beads

These “Ghost Pop Beads” snap together to form spooky chains or rings as long as you want! Use for decoration or to accessorize your costume.

See here for video: https://youtu.be/sqHG2kSpsd8 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the bottom end of one piece to open it up. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

This design is entered in the 2023 HalloweenWearable Contest

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 
Skull Pop Beads: https://than.gs/m/943349 


Simple vase - Industrial - Print in place!

easy and simple vase print, perfect for a gift, decoration, or shop item! Free as always for the first week and then members only. 

please drop a like & follow to keep weekly free models coming!

To sell physical prints subscribe to thangs memberships!

Simple vase - fancy - Print in place!

Simple vase - Print in place

Cthulhu Sign.stl

Simple sign, first color is only 1mm thick, second color is same.

Not much more to say about it! Enjoy :)

Hueforge 2 - Witch.stl

Hueforge - Witch 

To print it, 3 colors were used, in order:
- PLA Black from Arianeplast
- PLA Dark Violet from Eryone
- PLA Orange from Eryone
- PLA White from Ariane plast

We obviously have a HUEFORGE license.

**Print settings** : 

Height of the first layer: 0.16mm
Height of other layers: 0.08mm
100% filling

Black until layer #9 at 0.8mm
Dark Violet until layer #21 at 1.76mm
Orange until layer #31 at 2.56mm
White for the rest.


All my designs are copyrighted, so you can't sell digital or print files of them. If you would like to sell prints of my designs you can take out a commercial license.

If you'd like to keep up to date with the release of all my creations, don't hesitate to join me on my various networks:

[Instagram](https://www.instagram.com/arthena_3d/)

[Facebook](https://www.facebook.com/Arthena3D/)

[Tiktok](https://www.tiktok.com/@arthena.3d)

Don't hesitate to tag me or DM me on all my networks if you post photos of my creations, I'd love to see and share them :)

Halloween Ghost Cat Trio.3mf

As an owner of 3 cats, Halloween wouldn't be complete without a trio of ghost cats! 

Brain cupcake

10 - Brain Cupcake.stl

Stiches - Zombie cat on a jack-o-lantern - Decoration

Stiches - zombie cat - jack o lantern - Decoration

spiderweb tiara - HalloweenWearable

This is my first model for the HalloweenWearable designs. This is a cute Spiderweb tiara that i just absolutely love!! 


Skull Pop Beads

These “Skull Pop Beads” snap together to form spooky chains or rings as long as you want!

See here for video: https://youtu.be/pCv3Yx5U_7k 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the top end of one piece so that the opening becomes oval-shaped. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 


Digital Store
Decoration

Newest

Categories

New Uploads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Gumballs (All Teeth)

Bat Glasses || HalloweenWearable

Jason Bear

Glow in the dark moons

25mm Glow in the dark Star

Copper Cauldron

Ghost Pop Beads

Simple vase - Industrial - Print in place!

Simple vase - fancy - Print in place!

Simple vase - Print in place

Cthulhu Sign.stl

Hueforge 2 - Witch.stl

Halloween Ghost Cat Trio.3mf

Brain cupcake

Stiches - Zombie cat on a jack-o-lantern - Decoration

View 17 new models

Skull Pop Beads

1.5GB Tangle of 260 Spiderwebs (Loose Strand Density)

1.5GB Tangle of 260 Spiderwebs (Tight Strand Density)

1.5GB Tangle of 260 Spiderwebs (Normal Strand Density)

Digital StoreDecoration

Newest

Categories

New Uploads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Paid & Free Models

Trending

Popular

Videos

New Uploads

Downloads

Gumballs (All Teeth)

Bat Glasses || HalloweenWearable

Jason Bear

Glow in the dark moons

25mm Glow in the dark Star

Copper Cauldron

Ghost Pop Beads

Simple vase - Industrial - Print in place!

Simple vase - fancy - Print in place!

Simple vase - Print in place

Cthulhu Sign.stl

Hueforge 2 - Witch.stl

Halloween Ghost Cat Trio.3mf

Brain cupcake

Stiches - Zombie cat on a jack-o-lantern - Decoration

View 17 new models

Skull Pop Beads

1.5GB Tangle of 260 Spiderwebs (Loose Strand Density)

1.5GB Tangle of 260 Spiderwebs (Tight Strand Density)

1.5GB Tangle of 260 Spiderwebs (Normal Strand Density)

Digital Store
Decoration