“One ring to rule them all, one ring to find them, One ring to bring them all, and in the darkness bind them; In the Land of Mordor where the shadows lie.”

Print & Build Notes:
🔧 Recommended nozzle: 0.4 mm (also 0.2 nozzle if you want layer with Minas Tirith)
🔧 Layer height: 0.2 mm
🔧 Outer frame: 100% infill for structural rigidity and clean edges
🔧 Filament: PLA
 • Black PLA – OPTIONAL for outer box and first layer
 • White PLA with good transparency – light-diffusing layers

🔧 Print orientation:
 • Plates are uploaded upside down
 • Printing on a Textured PEI Plate in this orientation improves visible surface quality

Lighting:
🔧 Warm white LED strip recommended
🔧 Attach the LED strip horizontally to the lower half of the inner box back wall
🔧 Ensure even alignment for uniform light diffusion

Assembly:
🔧 Insert the layers (Layer 1, Layer 2, Layer 3, etc.) into the inner box in the correct order
🔧 Place the top holder onto the inner box from above
🔧 Slide the outer box onto the assembly from the front

The Lord Of The Rings Shadow Box Lamp

Multi-layer shadow box lamp designed for LED backlighting. Layered construction creates depth and clear silhouette separation when illuminated. This piece brings the legendary monster hunter Geralt of Rivia.

Print & Build Notes:
✅ Fine details require a 0.2mm nozzle for layer 6 and 6.1 (it's up to you which you choose)
🔧 Recommended nozzle: 0.4 mm
🔧 Layer height: 0.2 mm
🔧 Outer frame: 100% infill for structural rigidity and clean edges
🔧 Filament: PLA
 • Black PLA – OPTIONAL for outer box and first layer
 • White PLA with good transparency – light-diffusing layers

🔧 Print orientation:
 • Plates are uploaded upside down
 • Printing on a Textured PEI Plate in this orientation improves visible surface quality

Lighting:
🔧 Warm white LED strip recommended
🔧 Attach the LED strip horizontally to the lower half of the inner box back wall
🔧 Ensure even alignment for uniform light diffusion

Assembly:
🔧 Insert the layers (Layer 1, Layer 2, Layer 3, etc.) into the inner box in the correct order
🔧 Place the top holder onto the inner box from above
🔧 Slide the outer box onto the assembly from the front



The Witcher Shadow Box 3d Lamp

Multi-layer shadow box lamp designed for LED backlighting. Layered construction creates depth and clear silhouette separation when illuminated.

Print & Build Notes:
🔧 Recommended nozzle: 0.4 mm
🔧 Layer height: 0.2 mm 
🔧 Outer frame: 100% infill for structural rigidity and clean edges
🔧 Filament: PLA
 • Black PLA – OPTIONAL for outer box
 • White PLA with good transparency – light-diffusing layers

🔧 Print orientation:
 • Plates are uploaded upside down (despite combined layer 4&5)
 • Printing on a Textured PEI Plate in this orientation improves visible surface quality

Lighting:
🔧 Warm white LED strip recommended
🔧 Attach the LED strip horizontally to the lower half of the inner box back wall
🔧 Ensure even alignment for uniform light diffusion

Assembly:
🔧 Insert the layers (Layer 1, Layer 2, Layer 3, etc.) into the inner box in the correct order
🔧 Place the top holder onto the inner box from above
🔧 Slide the outer box onto the assembly from the front

Harry Potter Hogwarts Shadow Box 3d Lamp

Step into the mystical world of The Witcher with this stunning 3D shadow box lamp. 

Print & Build Notes:
🔧 Recommended nozzle: 0.4 mm 
🔧 Layer height: 0.2 mm
🔧 Outer frame: 100% infill for structural rigidity and clean edges
🔧 Filament: PLA
 • Black PLA – OPTIONAL for outer box and first layer
 • White PLA with good transparency – light-diffusing layers

🔧 Print orientation:
 • Plates are uploaded upside down
 • Printing on a Textured PEI Plate in this orientation improves visible surface quality

Lighting:
🔧 Warm white LED strip recommended
🔧 Attach the LED strip horizontally to the lower half of the inner box back wall
🔧 Ensure even alignment for uniform light diffusion

Assembly:
🔧 Insert the layers (Layer 1, Layer 2, Layer 3, etc.) into the inner box in the correct order
🔧 Place the top holder onto the inner box from above
🔧 Slide the outer box onto the assembly from the front
For a stronger sunset effect, consider placing one or more LEDs diods behind the center of the circular cutout in the last layer.



The Witcher Shadow Box Lamp

Print & Build Notes:
🔧 Recommended nozzle: 0.4 mm 
🔧 Layer height: 0.2 mm
🔧 Outer frame: 100% infill for structural rigidity and clean edges
🔧 Filament: PLA
 • Black PLA – OPTIONAL for outer box and first layer
 • White PLA with good transparency – light-diffusing layers

🔧 Print orientation:
 • Plates are uploaded upside down
 • Printing on a Textured PEI Plate in this orientation improves visible surface quality

 

Lighting:
🔧 Warm white LED strip recommended
🔧 Attach the LED strip horizontally to the inner box back wall
🔧 Ensure even alignment for uniform light diffusion

 

Assembly:
🔧 Insert the layers (Layer 1, Layer 2, Layer 3, etc.) into the inner box in the correct order
🔧 Place the top holder onto the inner box from above
🔧 Slide the outer box onto the assembly from the front

The Lord of the Rings Light Box Book Nook Lamp

Cozy decor & shadow boxes

Hi, i'm Victoria 👋 
I love adding a magical touch to things that I create 🧙
My main interest is making shadow boxes from fantasy and sci-fi world ✨
If you have questions or problems with printing projects feel free to ask 🧐
I recently started Instagram, you can check there photos & videos with my designs.

Rising Stars Designers

Fast Growing New Designers

The Lord Of The Rings Shadow Box Lamp

The Witcher Shadow Box 3d Lamp

Harry Potter Hogwarts Shadow Box 3d Lamp

The Witcher Shadow Box Lamp

The Lord of the Rings Light Box Book Nook Lamp

The Lord Of The Rings Shadow Box Lamp

The Witcher Shadow Box 3d Lamp

Harry Potter Hogwarts Shadow Box 3d Lamp

The Witcher Shadow Box Lamp

The Lord of the Rings Light Box Book Nook Lamp