🦣 Manny, the Ice Age Mammoth 🦣
Get ready to meet the grumpiest yet most lovable mammoth of the prehistoric world! Manny has arrived as a printable figure to brighten up your desk, shelf, or any corner you decide to put him in. And the best part... it’s completely FREE! Yes, you heard that right: FREE. Just like the mammoths roaming the icy plains back in the day.
Though Manny looks serious, he’s actually a big softie with a heart larger than his tusks. So, if you need a buddy to keep you company while you work, study, or simply enjoy a mammoth-style nap, he’s your guy!
But hey, remember that behind every figure, there’s a lot of love and hard work. If Manny brings a smile to your face, feel free to give a "like," follow me for more awesome figures. That way, Manny and I can keep our energy up and bring you more epic characters!
Parámetros de impresión 3D For Filament Printer (FDM): Layer Height: 0.1 - 0.2 mm (depending on the desired level of detail). Print Speed: 40-60 mm/s (slower speeds result in better details). Nozzle Temperature: PLA: 190-210 °C. PETG: 230-250 °C. ABS: 220-240 °C. Bed Temperature: PLA: 50-60 °C. PETG: 70-80 °C. ABS: 90-110 °C. Infill Density: 15-25% (depending on the desired strength). Supports: Yes. Supports are likely needed for overhangs like tusks. Cooling Fan Speed: PLA: 100% after the first layer. PETG: 30-50%. ABS: Turn off (best in an enclosed chamber). Bed Adhesion: Use Brim or Raft to improve adhesion and prevent warping (especially with ABS). For Resin Printer (SLA/DLP): Layer Height: 0.025 - 0.05 mm (to achieve high resolution and fine details). Exposure Time: Base Layer: 30-40 seconds (depending on resin and printer). Normal Layer: 6-10 seconds (depending on resin). Infill Density: N/A (resin prints are solid). Supports: Yes. Supports are required, especially for hanging or protruding parts like tusks and trunks. Printing Angle: Print at a 30-45 degree angle to reduce the amount of supports and improve quality. Post-Processing: Cleaning: Wash the figure in 99% isopropyl alcohol (IPA). Curing: Cure under UV light for 3-5 minutes, depending on size and resin. Additional Settings: Ensure proper ventilation and use filters, as resin can be toxic.
Categorías