Imagine Chi-Chi from Dragon Ball, the fiercest and most determined warrior, striking a pose so perfect she looks ready to leap off your shelf and scold you for not doing your homework! But wait, there's more! This collectible figure doesn't just capture her essence 100%; it's also cleverly divided into multiple parts for flawless 3D printing.
Each section is crafted with amazing detail, from her vibrant kimono to her intense expression of determination. Assemble it piece by piece and enjoy watching her come to life. This segmented design not only makes home printing easier but also ensures that each component has a clean, professional finish.
It's as if Chi-Chi is waiting for you to complete her figure so she can deliver one of her famous lectures! Perfect for Dragon Ball fans who love to collect and customize their figures. Add this gem to your collection and always have Chi-Chi ready for action!
Parámetros de impresión 3D Material (Filament):
PLA: Easiest to print and offers good detail for figures. If you prefer something more durable or with a better finish, you can use PETG or ABS, but these require different temperature settings. Printing Temperature:
PLA: 200-210°C for the nozzle and 60°C for the heated bed. PETG: 230-240°C for the nozzle and 70°C for the heated bed. ABS: 240-250°C for the nozzle and 90-100°C for the heated bed. Print Speed:
Overall Speed: 40-50 mm/s. Slower speeds can improve detail. Outer Layer Speed: 25-30 mm/s for a cleaner surface finish. Layer Height:
0.1 mm for fine, smooth details. You can also use 0.12 mm for a balance between quality and print time. Infill Density:
15-20% with patterns like "Gyroid" or "Tri-hexagon" to provide sufficient internal support without significantly increasing print time. Support Type:
Support Overhang Angle: 50-60° to reduce the need for supports. Support Type: "Tree Supports" or "Organic Supports" to reduce material usage and ease removal. Retraction Settings:
Retraction Distance: 0.8-1 mm for Bowden setup; for Direct Drive, lower it to 0.4-0.6 mm. Retraction Speed: 40-50 mm/s. Cooling:
Part Cooling Fan: Set to 100% after the first layer. The Bambu Lab X1 has an excellent cooling system to handle this. Bed Adhesion:
Adhesion Method: Brim or Raft. A "Brim" is enough for a figure this size and helps improve adhesion without using too much material. Brim Lines Count: 5-10 lines. Post-Processing:
Light Sanding: To remove small imperfections. Painting: Use model primer and then acrylic paint for details.