This is my 2nd Version of this part, due to ergonomic issues, the last version felt different than the original hinge and started to feel uncomfortable, so I tried to get as close to replicating them.

I achieved this by changing the angle from 11° to 25°, though if you prefer the original angle, I've included a version that is 11°

I basically redesigned the entire model in [Onshape](https://cad.onshape.com/documents/b5155ed92f6cb5773388d586/w/bd6b40a826a0f4890c893950/e/713adb587230f49685d978d7?renderMode=0&uiState=62e6375ea0feaa28819aa8d4), all hardware from [the previous version](https://thangs.com/designer/weegee721/3d-model/Siberia%20840%20Hinge-67243?manualModelView=true) can be reused in this version

Should work with Siberia 800, Siberia 840, and Siberia H.

This Design uses a [4mm E-clip](https://www.amazon.com/gp/product/B09JKWQBW7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) to secure the hinge, and I used [M2x6mm self tapping screws](https://www.amazon.com/gp/product/B09JB7HFGZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1) from the same assortment box of screws I used for [Jakob's version](https://www.thingiverse.com/thing:5151692) (his version uses the M1.5x5mm) so everything cost me about $27 bucks, Cheaper than a new headset.

And you'll need some files.

I recommend cutting a small notch in the center of the e-clip so you can visually see where to pull it out if you have to disassemble it.

Feel free to modify / improve on this design, I'll be including step files and a link to the [Onshape Repo](https://cad.onshape.com/documents/b5155ed92f6cb5773388d586/w/bd6b40a826a0f4890c893950/e/713adb587230f49685d978d7?renderMode=0&uiState=62e6375ea0feaa28819aa8d4).

I recommend using Esun or Inland PLA+
PLA+ a very durable filament so I hope it lasts a long time.

I recommend tuning "Support Z Distance" for your machine, for me the layer height I print at works fine.

General Settings:
- Layer Height: 0.16mm 
- Gyroid Infill: 10% 
- Tree Supports
- Support Z Distance: 0.16mm
- Tree Support Branch Distance: 0.15mm
- Branch Angle **Important!**: 45° 
- Branch Walls: 2
- Support Interface Pattern: Lines
- Support Interface Thickness: 0.8mm 

After printing you're gonna need to file the underside where the plate screws in, the plate should sit flush.

A Dremel or a precise cutting tool is required to get the earcup separate from the stock hinge without de-soldering the cable, Please be careful to not cut the cable, take your time be patient.

Tags cause I can't add tags to thangs #Steelseries #Siberia 800 #Siberia 840 #Siberia H #Headphones #Hinge

Siberia "840, 800, H" Replacement Hinge V3

Hinge Body.stl

!!!There is a [new version](https://thangs.com/designer/weegee721/3d-model/Siberia%20%22840%2C%20800%2C%20H%22%20Replacement%20Hinge%20V3-215928?manualModelView=true) I created, hopefully more comfortable!!!

This is still work in progress, I hope everything is dialed in, this is a remix of [jakob029's](https://www.thingiverse.com/thing:5151692) as I wasn't happy with how it attaches to the headband.

Should work with Siberia 800, Siberia 840, and Siberia H.

New! [Elastic Headband](https://www.amazon.com/gp/product/B07BS94YD5/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) mod use the pause at hight feature in cura to add a [Buckle](https://www.michaels.com/dritz-1.5in-black-adjustable-slide-buckles/10604516.html) or [Metal Rectangle](https://www.amazon.com/Rectangle-Buckles-Shinning-Webbing-Gunmetal/dp/B09FGS3VS5/ref=sr_1_1?crid=2DGA07V2GMFO9&keywords=1+1%2F2+inch+metal+rectangle&qid=1652684757&sprefix=1+1%2F+inch+metal+rectangale%2Caps%2C572&sr=8-1) mid-print! Everything should be oriented correctly when you import the model in the slicer.

List of improvements,
- Retention of the range of motion
- Solid and strong connection to headband
- Cable management improvements
- Support for elastic straps

This Design uses a [4mm E-clip](https://www.amazon.com/gp/product/B09JKWQBW7/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) to secure the hinge, and I used [M2x6mm self tapping screws](https://www.amazon.com/gp/product/B09JB7HFGZ/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&th=1) from the same assortment box of screws I used for Jakob's version (his version uses the M1.5x5mm) so everything cost me about $27 bucks, Cheaper than a new headset.

I recommend cutting a small notch in the center of the e-clip so you can visually see where to pull it out if you have to disassemble it.

Feel free to modify / improve on this design, i'll be including step and f3d files as I had to remake Jakob's model from scratch.

I printed using Esun PLA+
it's a very strong filament so I hope it lasts a long time.

I recommend tuning "Support Z Distance" for your machine, Supports should look like the one in the photo.

General:
- .16mm layer height
- 15% Gyroid infill
- Ironing recommended

Supports for Hinge and Elastic Mod:
- Tree supports
- 45* branch angle (Very important)
- 2 walls for branches

Supports for Cover:
- Normal supports
- XY distance 0.3mm (Very important)

A Dremel or a precise cutting tool is required to get the earcup separate from the stock hinge without de-soldering the cable, Please be careful to not cut the cable, take your time be patient.

Tags cause I can't add tags to thangs #Steelseries #Siberia 800 #Siberia 840 #Siberia H #Headphones #Hinge

Siberia 840 Hinge

Hinge.stl

Elastic Mod.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

weegee721

Achievements

Seedling

Siberia "840, 800, H" Replacement Hinge V3

Siberia 840 Hinge