Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5923719.

this Sample of  filaments is taken from the project by Mattia Confalonieri (youtube.com/watch?v=7tQfUsudLcc).
I had to divide the project into several parts to print it comfortably and for fixing the parts I recommend this excellent glue https://www.amazon.it/Bostik-D8106-Super-Bond/dp/B07ZC965PT?pd_rd_w=62nBU&content- id=amzn1.sym.4452adfe-3b67-4ee3-ab5d-48df39d78514&pf_rd_p=4452adfe-3b67-4ee3-ab5d-48df39d78514&pf_rd_r=XJR1WAGTDZNEWRM1WD4D&pd_rd_wg=6pojk&pd_rd_r=9a2ce19e-c262-4f40-972d-782c8478732c&pd_rd_i=B07ZC965PT&psc=1&ref_=pd_bap_d_grid_rp_0_1_t

questo Campione di filamenti è tratto dal progetto di Mattia Confalonieri (youtube.com/watch?v=7tQfUsudLcc).
Ho dovuto dividere il progetto in più parti per stamparlo comodamente e per fissare le parti consiglio questa ottima colla =amzn1.sym.4452adfe-3b67-4ee3-ab5d-48df39d78514&pf_rd_p=4452adfe-3b67-4ee3-ab5d-48df39d78514&pf_rd_r=XJR1WAGTDZNEWRM1WD4D&pd_rd_wg=6pojk&pd_rd_r=9a2ce19e-c262-4f40-972d-782c8478732c&pd_rd_i=B07ZC965PT&psc=1&ref_=pd_bap_d_grid_rp_0_1_t

sample of honeycomb-shaped filaments. (campione di filamenti a nido d'ape)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5473612.

I designed this bracket for my flying bear LASERMAN laser. the fixing holes that join the bracket to the laser are to be done with the drill, this allows you to use these brackets for all lasers similar to mine.

Bracket for fixing a laser on a panel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5473650.

I designed this air assist for my flying bear LASERMAN laser, It is 21mm high perfect for focusing the laser.

Air assist

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5833335.

this pen holder, like all creations, was born from a need, to have modularity. So both the pen holder and the post-it holder can be moved as you wish, keeping them united. in the pen holder, there are grooves that allow you to insert dividers to make the pen holder even tidier. on the back, there is a calculator port, and on the front 4 USB slots, 2 micro sd slots, and 1 sd slot.


questo portapenne, come tutte le creazioni, nasce da un'esigenza, quella di avere modularità. Così sia il portapenne che il portapost-it possono essere spostati a piacere, mantenendoli uniti. nel portapenne sono presenti delle scanalature che permettono di inserire dei divisori per rendere ancora più ordinato il portapenne. sul retro è presente una porta per calcolatrice e sul davanti 4 slot usb, 2 slot micro sd e 1 slot sd.

Desktop Organizer, Pen Holder (portapenne)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5594012.

This is an alternative to make your flying bear ghost 5 printer more comfortable. I used a 3mm PVC panel that I cut with my flying bear laserman.
You will need to create extensions for the extruder cables and for the filament sensor.
https://amzn.eu/d/cQK2s0V   =extruder cables
https://amzn.eu/d/exSC15B   =filament sensor cables

Side mount for extruder and spool for Flying Bear Ghost 5

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5834558.

this is a tester support suitable for both desk and equipped wall, having two holes on the back designed for two magnets. https://www.amazon.it/dp/B08K39Q1DL?ref=ppx_yo2ov_dt_b_product_details&th=1

si tratta di un supporto per tester adatto sia a scrivania che a parete attrezzata, avendo due fori sul retro predisposti per due magneti.

mini tester holder (supporto per mini tester)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5923933.

replacement for SodaStream

replacement for SodaStream (ricambio per SodaStream)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5238068.

questo portapenne permette di tenere a portata di mano, bit, punte, sessatore, accendino e penne e matite.
ATTENZIONE!!
i fori sono fatti su misura per le penne, pennarelli e matite in figura (si può scaricare insieme al file stl). 
il materiale è facilmente reperibili su amazon:
https://www.amazon.it/Bic-802077-801867-Blister-Classico/dp/B007CX2HKE/ref=sr_1_13?crid=D3JU2ZLNT68A&keywords=penna+bic+quattro+colori&qid=1644330568&sprefix=penna+bic+q%2Caps%2C93&sr=8-13

https://www.amazon.it/STABILO-OHPen-universal-permanente-colore/dp/B004L1AWBG/ref=sr_1_17?crid=3IQF90Y3JMW16&keywords=pennarello+stabilo&qid=1644330617&sprefix=pennarello+sta%2Caps%2C80&sr=8-17

https://www.amazon.it/BIC-951478-Matic-Combos-10-portamine-assortiti/dp/B07CLQZGHC/ref=sr_1_3?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=384DASS3K15H1&keywords=portamine+bic&qid=1644330654&sprefix=portamine+bi%2Caps%2C77&sr=8-3

https://www.amazon.it/Pyca-150-46-Tintura/dp/B000XQA2F4/ref=sr_1_7?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=15AA8H31GVR5T&keywords=pennarello+pica&qid=1644330676&sprefix=pennarello+pica%2Caps%2C77&sr=8-7

https://www.amazon.it/Pentel-BL437-Energel-roller-scatto/dp/B07QPHS88F/ref=sr_1_6?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3BR2SKZ5UUJ3T&keywords=penna%2Benergel%2B07&qid=1644330715&sprefix=penna%2Benergel%2B07%2Caps%2C66&sr=8-6&th=1


pen holder for maker

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5923911.

Nespresso coffee pod holder divided into two parts for a more premium finish.

Porta cialde per caffè Nespresso diviso in due parti per una finitura più pregiata

Nespresso Coffee Pod holder (Porta cialde per caffè Nespresso)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5473634.

I designed this bracket ad L to accommodate 2 M5 nuts.

L-bracket with insert for M5 nut

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5834500.

holder for caliber with hole for inserting a magnet.
supporto per calibro con foro per l'inserimento di una calamita.
magnet:  https://www.amazon.it/dp/B08K39Q1DL?ref=ppx_yo2ov_dt_b_product_details&th=1 
 

caliber holder (supporto per calibro)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5838083.

In the STL file, unlike the photos, the writings are more visible and the holes for the bits are deeper. Happy printing friends!

Nel file STL, a differenza delle foto, le scritte sono più visibili e i fori per le punte sono più profondi. Buona stampa amici!

pen holder for maker (portapenne per maker)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

vosa

Achievements

Seedling

Debutant