This is a dispenser to hold up to 11 7 gram glue sticks.  It is designed to work with the Multiboard attaching using a 13mm Big Thread Flat Head Shank Bolt.  I used standard Multiboard print settings except to add supports for the overhangs near the bottom of the dispenser.

Multiboard 7 gram glue stick dispenser 

glue-stick-dispenser.stp

**NEW IMPROVED VERSION [AVAILABLE HERE](https://than.gs/m/1525529)!**

A Multiboard holder for four snips. Designed for use with [these snips](https://www.aliexpress.com/item/1005006937040585.html). Has a Lite Multipoint Rail on the back. 

Recommend printing with 
- 0.2 mm layer height
- 3 walls
- 15% Gyroid infill
- Tree supports in critical areas only (see pictures)

Multiboard 4-Snip Holder

Multiboard 4-Snip Holder.stl

Looking for your tape measure again?

Having your tape measure on your Multiboard, you'll never spend time looking for your tape measure again.
Better yet, put a Multiboard up in every room with tape measures on each so one will always be within arms reach.

Print upright with no supports at 0.2mm layer height with three walls for optimal strength.
Requires 2 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard, which may be obtained from "Keep Making" on Thangs.

Multiboard Tape Measure Storage Clip

Multiboard Tape Measure Storage Clip.stl

Welcome to the **MULTIVERSE**!  
Bringing together two amazing organizational systems, Multiboard and Gridfinity - easy to install, incredibly strong shelves that attach with Multiboard T-Bolts!  In 4 sizes for you to explore!

**Files Included:**
**3 Shelf Sizes: 1x2 - 2x3 - 2x4 - 2x5**
Included a T-Bolt, and MultiTool (by Keep Making for convenience)

**Multiboard Printing Guidelines:**
The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. 

This object is part of **Multiboard**, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at [https://multiboard.io](https://multiboard.io)   

Inspired by the gridfinity baseplate from Daboo.


MultiBoard Gridfinity Shelves

MultiBoard_GridfinityShelf_2x3.stl

MultiBoard_GridfinityShelf_2x4.stl

MultiBoard_GridfinityShelf_2x5.stl

Multitool.stl

9 mm Small Thread, Flat Head, T-Bolt.stl

MultiBoard_GridfinityShelf_1x2.stl

This pack contains all the parts, laid out, and ready to print instantly. PLUS a [video tutorial](https://youtu.be/lRQ8F-Mj2z4) showing you how to assemble everything.

To access this pack, you must have a "Multi Maker" membership, Multi Makers also get access to all other Multiboard packs, part generators, and early access to parts. [Learn more](https://www.multiboard.io/support)

The video tutorial for this pack is here: https://youtu.be/lRQ8F-Mj2z4

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the files. Make sure the downloaded files are .STL. 

Simple Basket #1 - Multiboard Pack (+Video Tutorial)

Simple Backet Pack #1 - Plate 3 - Connections.stl

This a remix of this great design: https://www.printables.com/model/859943-multiboard-parametric-bottle-holders

I did this remix because the original one uses pegboard click mounts which demands supports for printing. This version uses Multipoint rails, so it can be printed without supports in the provided position.

I've included Fusion 360 parametric files in two versions: one for large bottles (uses two rails on the back) and other for small bottles (uses a single rail). One of the parameters controls the bottle size (named "BottleSize") and the other controls the height of the part (named "HolderHeight"). I do not recommend lowering that last parameter too much or you'll break the model. I've also included two STLs, one for 90 mm diameter bottles (two rails) and another for 45 mm bottles (single rail).

When mounting the single rail version on Multiboard tiles, I recommend using two consecutive Multipoints vertically to avoid the holder spinning.

License: https://www.multiboard.io/license

Multiboard - Parametric Bottle Holder

Bottle Holder 90mm.stl

# 🗂️ MultiBoard Drawer Label Generator – Flush Insert

Need a clean, custom way to label your MultiBoard drawers? This is the **flush insert model** that pairs with my **Label Generator Tool** on MakerWorld.

This model fits standard **1L and 2L MultiBoard drawers** and is perfect for organizing your workspace. It prints flat and smooth for a clean look – no more messy tape labels!

👉 **Use the label generator here to create your custom text STL:**  
[🔗 MakerWorld Label Generator (Flush)](https://makerworld.com/en/models/1568211-multiboard-simple-drawer-label-generator-flush#profileId-1648875)

---

## 🧱 Recommended Filament

These filaments work great for sharp text and smooth finishes:

- [Polymaker PLA PRO](https://amzn.to/4dy5Ymd) – Premium finish, strong and reliable  
- [Elegoo PLA](https://amzn.to/45nqmUY) – Affordable and prints beautifully  
- [ANYCUBIC PLA Plus](https://amzn.to/4kzy8zs) – Excellent dimensional accuracy

---

## ⚙️ Print Settings

- **Material:** PLA  
- **Layer Height:** 0.2 mm  
- **Infill:** 15–20%  
- **Supports:** Not needed  
- **Brim:** Optional

---

## 💬 Notes

- This is the *blank insert only*. Use the MakerWorld generator to personalize with your own label text.  
- Designed to snap perfectly into MultiBoard label holders – no glue necessary.

---

✅ Prefer an **embossed version** instead of flush text?  
Check it out here:  
[🔗 MakerWorld Label Generator (Embossed)](https://makerworld.com/en/models/1509732-multiboard-label-generator#profileId-1580523)

## 🛠️ Level Up Your 3D Printing Setup  
Looking for more? Here's my personal list of tools, filaments, and must-haves:

👉 [**MS 3DPrints Essentials – Amazon Buying List**](#)  
*(Affiliate link – helps support my work at no extra cost to you)*

---

💬 Feedback, remixes, and makes are always welcome — let’s build smarter, together!  
☕ [**Buy Me a Coffee**](#) – Any support is truly appreciated!


Multiboard Simple Drawer Label Generator (Flush)

Multiboard flush labels.3mf

This mount sticks to a surface using VHB Tape and attaches to a Multiboard Tile, creating a 12.5 mm offset from the surface.

These Snaps can be placed next to each other to increase the surface area of the VHB Tape. We recommend using VHB Tape 5952F.

This is a "Part A" piece, and attaches to four [Part B Snaps](https://than.gs/m/1323061).

**Printing Guidelines:**

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and not supports. Apart from that, use your printers default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, [click here](https://multiboard.io/knowledge-hub/printing-guidelines).

---

This object is part of Multiboard, a FREE and ridiculously modular organization system with thousands of parts, for creating the most adaptable workspace possible. Learn more and find ALL the parts at https://multiboard.io


12.5 mm - Dual Snap (DS Part A) - VHB Tape Mount

12.5 mm - Dual Snap (DS Part A) - VHB Tape Mount.stl

Multiboard

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

twhawx

Achievements

Novice Maker

Voyager