Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6198131.

Edited the original's 18650 models in tinkercad to add room for battery contact wires. Also added + and - labelling. I used little magnets as battery contacts in mine.

Tinkercad model: 
https://www.tinkercad.com/things/atBxP65iEcd

I printed mine with MonoPrice black PLA, it was pretty stringy and I had to clean out the hole openings on the bottom with a drill bit as well as scrape out the channel for the wire with a little pick tool. Battery's fit is *very * snug with the wire in there!

18650 battery tube enclosure

This is a remix of this by skroob (original license attached): https://www.youmagine.com/designs/odroid-c4-case

Using Tinkercad: 
https://www.tinkercad.com/things/9akxlo0ZdoA-odroid-c4-case-remix

Edit: Added alternate top with holes for IR and GPIO.
https://www.tinkercad.com/things/bGNgfIXOj1a

Odroid C4 case remix

odroid c4 case remix top.stl

odroid c4 case remix top-holes.stl

odroid_c4_case_remix-holes.3mf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3419351.

My kids kept breaking the original 5-way, so this one has a tiny bit of extra support on the middle joints. https://www.tinkercad.com/things/7dXLcn51Gjq-pvc-5-way

There is also a modified version of the sheet clip that can plug onto a pipe. https://www.tinkercad.com/things/b4y0bZvspP5-pvc-side-clip

The 4-way roof topper can connect 4 2-foot pipes together so that it can rest on top of a 2-foot by 2-foot square. https://www.tinkercad.com/things/covRruqC6m8-pvc-fort-roof-topper

PVC fort pieces

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4981295.

This is a lid for a travel model of Waterpik.

Tinkercad:  https://www.tinkercad.com/things/0iIiqmS6Ebo 

Waterpik Lid for travel lid

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4833227.

This is a base for the end of the BTF-200-12 (12V, 16.5A) version of this power supply:
https://www.aliexpress.com/item/32670477391.html

It covers the end with the terminals to hold the supply upright (like a Wii). There are internal holes for routing wires to the terminals. The 110V/220V AC input goes in one side and the 12V DC comes out the other. There are 2 screw holes and 2 holes that I think are for venting because they aren't threaded. The screws are optional since it's a pretty snug fit.

In the future I'd like to add some sort of mount for a switch/plug, but this works good enough for now.

This is the switch I used: 
https://smile.amazon.com/dp/B07RRY5MYZ


Tinkercad: 
https://www.tinkercad.com/things/2xEo0w57a2n-btf-200-12-power-supply-base-v2a

BTF-200-12 Power Supply Base

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3368374.

This is a work in progress of my 32 pixel avatar.

Print a bric 2x2 was used as the source for the lego based one.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/1nH2mTRRC4m

Travis

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4536107.

Our solar garden lights have crappy spikes that keep breaking so I made these as a replacement.

Solar Light Ground Spike

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4750434.

My original Fitbit Blaze watch band holder broke, and I grew tired of using rubber bands and twist ties, so I designed this with Tinkercad. 
https://www.tinkercad.com/things/5Lc093YhNvq

Fitbit Watch Band Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4808404.

This is a remix of: Avocado Seed Grower by @martin_bamp:
https://www.thingiverse.com/thing:4794117

I had a large pit that wouldn't fit in any other boats or holders so I needed to make a larger one. I also cropped a bit of the outside to better fit the pint glasses I use to sprout them.

Tinkercad links for remixes: 
Big: https://www.tinkercad.com/things/5RDxA4Q6Vvg-big-avocado-pit-holder
Regular: https://www.tinkercad.com/things/65HNxJfpIqw-regular-avocado-pit-holder

pint-size avocado pit holder (regular & large)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4128599.

The rollers' axles keep popping out, so after 5 revisions in tinkercad I finally have one that works. It fits really snug so hopefully it won't get too deformed from the heat of the dishwasher.

https://www.tinkercad.com/things/iZj1i8K0s2w-dishwasher-pin/edit

Maytag MDB4949SDH1 Dishwasher dish tray roller pin

I have been using a version of this tool made out of plywood for a few years now and it's really handy when gluing and assembling corners. The plywood versions are starting to fall apart now so I thought I'd try 3d-printing a version of it with room for some larger clamps.

Tinkercad: https://www.tinkercad.com/things/iJ63vJZFXwb-right-angler

Thingiverse: https://www.thingiverse.com/thing:4902282

Original plywood right-angle clamp jig and usage (some other great tips here too!):
6 Woodworking tips & tricks for beginners by DIY Creators
https://youtu.be/3cME3vK1aaQ?t=273

#summer

Right Angler (clamp-corner helper jig)

right angler.stl

☺ he/him 
https://www.thingiverse.com/travishardiman

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

travishardiman

Achievements

Seedling

Explorer