A piece to clamp onto the end of a two-by-two with 1/2"-spaced holes for #6 screws to connect to a [drill guide](https://thangs.com/model/905363) or anything else you might want.

p1123-TwoByTwoEndJig-v1.0.stl

A piece to clamp onto the end of a two-by-two with 1/2"-spaced holes for #6 screws to connect to a [drill guide](https://thangs.com/designer/togos00/3d-model/p1011-DrillBitBushingJig-v1.2.stl-905363) or anything else you might want.

Designed to hold a 1/2" OD x 1+1/2" aluminum bushing (I use https://www.thingiverse.com/thing:6124290) perpendicular to a surface to be drilled into.  1/2"-spaced holes for #6 screws allow it to be bolted directly to the workpiece, or to another jig piece.

The OpenSCAD design has parameters for inner and outer diameter, so can be customized to other bushings or for use without a bushing.

p1011-DrillBitBushingJig-v1.2.stl

5"-wide [TOGRack](http://www.nuke24.net/docs/2018/TOGRack.html) panel that is a 3x2 Gridfinity baseplate.  Use flathead #6 screws to attach it to your TOGRack.

Also features countersunk holes for 1/4" flatheads in a 1+1/2" pattern for affixing to 1+1/2" (i.e. 38.1mm) gridbeam structures.

TOGRack Gridfinity Baseplate v1.2 3x2

5"-wide [TOGRack](http://www.nuke24.net/docs/2018/TOGRack.html) panel that is a 3x2 Gridfinity baseplate.  Use flathead #6 screws to attach it to your TOGRack.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

togos00

Achievements

Seedling

p1123-TwoByTwoEndJig-v1.0.stl

p1011-DrillBitBushingJig-v1.2.stl

TOGRack Gridfinity Baseplate v1.2 3x2