tiny gila monster

One of my favorite lizards with its fun color patterns. This particular model was designed with multicolor printers in mind (Bambu AMS, Prusa XL, etc.) and prints in place with no supports.

3MF files are included with the colors already blocked out. The STLs also have the bumps easily paintable with any slicer-based fill/paint bucket tool for a completely different imaginary and fun color pattern.

Files included:

• unibody STL (single part printing)
• unibody 3MF (single part multicolor printing)
• multipart STLs (separate part printing and assembly)
• multipart 3MF (multicolor separate part printing and assembly)

Print settings and recommendations:

• 3 walls at 0.4mm nozzle size
• 40-60mm/s outer wall speed recommended
• 15% infill (adaptive cubic, cross hatch, or gyroid)
• no supports, slow down for overhangs enabled
• no brim unless encountering adhesion issues
• PEZ / polyurea plate recommended
• 65% scale tested for all models

Licensing: These model files are for your personal use only. Commercial licensing is available to sell physical prints of all tinymakery designs at patreon.com/tinymakery.