A coaster! make your workstation be full of holiday atmosphere, like have a cup of mocha on the beach in Maldives at noon to restore your vitality! At the same time, it is also a doll storage, you can put your cute doll on it and pretend that it is on vacation in Maldives

instructions:

In order to take into account the player's materials, the model components have a large tolerance, and need to be bonded with thick glue or melt-type glue, such as A+B mix glue or FDM model polishing liquid, etc. It is recommended to use PETG polishing liquid for bonding. You can choose your existing colors/materials to print, for example, if you want to make the leaves more emerald. Except for the pool coaster for coffee cups, which is printed with heat-resistant materials (PETG or ABS is fine), all components can be printed with PLA.

The installation order is:

1. Use a hot air gun to shape the leaves: prepare a small bowl of water and place it on the side. After the leaves are softened with hot air, they can be easily bent into a natural drooping shape, and then immediately put them in cold water to shape.

2. Install the leaves on the trunk (from top to bottom, glue 3 small leaves, 3 medium leaves, and 7 large leaves, or slightly disrupt the order to get a more natural effect), and repair the trim of the lower part of the trunk, and grind the sharp edges into an arc to facilitate the next installation; glue the sail to the boat with the hole, and glue the water surface to the beach, and then glue the sailless boat on the shore.

3. Install the tree to the corresponding position on the beach. When installing, you can gently turn it to find the right insertion angle, and then drip polishing liquid into the side seam to glue the tree to the beach.

4. Put a cup of coffee on the small swimming pool, enjoy the tranquility of the seaside for a moment!