**Welcome to Thoren's Maze of Confusion.** You are a fearless Treasure Hunter who has learned about the secret location of vast Treasures. However the Treasure is scattered within a maze, that rumor has it,  no Treasure Hunter has ever escaped!  Perhaps they had lost their way, or had fallen victim to a trap, or maybe there are Monsters! No matter! You are Cunning, Invincible, and above all Fearless! But you are not the only one who has heard about it! There’s no time to waste! Simple plan! Enter the Maze, Collect as much Treasure as possible, and be the First Treasure Hunter to Escape!

This is a Modular playing field Board Game that requires time to setup prior to game play. The Sub-floor consists of Space Holders, Gears, and Connectors. The playing field can be a large or as small as you want to make it to accommodate any  number of players. The playing field can also be constructed in various configurations to make each game experience unique.

**How to Play**

Game Play:  The Game is played in Rounds. I suggest a minimum of 3 Rounds. Only the Player who Escapes First will receive points each round. Points equals the number of Treasure Chests that Player collected that winning Round. Tally the number of collected Treasure Chests after 3 (or more) Rounds to determine the Winner.

Players Turn: There are 3 Actions a Player MUST take during their Turn:  SPIN,  MOVE, and ROTATE ONE FLOOR TILE

**Example of Game Play: **
Player One’s turn; Player One spins the Spinner and receives 3 Moves. Player One then takes their Player token and moves North one Floor Tile, ROTATES this Floor Tile left one Quarter Turn, then Proceeds West one Floor Tile, and South one Floor Tile where they collect one Treasure Chest. Player’s Two’s turn; Player Two spins the Spinner and receives 1 Move. Player Two is on a Floor Tile that has no aligned Path to an adjacent Floor Tile. Player Two Rotates the Floor Tile Right one Quarter Turn to align with another Floor Tile facing East. Player Two then Moves 1 Space East and ends their turn.
Play continues until all the Treasure Chests have been collected. Once all Treasure Chests are collected, continue taking turns now focusing on reaching a Door and escaping from the Maze.

Winning the Game: Only the Player who escaped the Maze First each Round receives Points for each Treasure Chest collected. Tally Points and the Player with the most Points after the Last Round, WINS! If there is a TIE, PLACE the tied Player Tokens at opposite Door Enterances, 1. SPIN 2. MOVE 3. ROTATE to be the First Player to reach the other Players Door and Escape to WIN. The Player who collected the most Treasure Chests in the first Round would go first.

**Example of a 2 Player Game:**
 In a 2 Player Game with 8 Treasure Chests. In Round One, Player One collected 3 Treasure Chests and Player 2 collected 5. Player One Escapes first. Player One would receives 3 Points, and Player Two receives 0. In Round Two, Player One collected 4 Treasure Chests and Player 2 collected 4. Player Two Escapes First. Player One receives 0 Points, and Player Two receives 4. Tally for 2 Rounds would be Player One = 3, Player Two = 4. In Round 3, Player One collected 2 Treasure Chests and Player 2 collected 6. Player One Escapes first. Player One receives 2 Points, and Player Two receives 0. Tally for 3 Rounds would be Player One = 5, Player Two = 4. Player One WINS!

**Pre-Setup: Creating the Play Field and Sub-Floor**
The Sub-floor consists of Space Holders and Gears which allows the Playing Field to change its appearance by rotating one Round Floor Tile and magically rotating one or more other connected Floor Tiles that sit on top of the Sub-floor.
You choose the layout of the Maze and you choose which Floor Tiles will be connected and turn in unison. A scenario would be Player One spins the Spinner and Moves 3 Spaces then Rotates the last landed upon Floor Tile which spins a Floor Tile two Spaces away and foils Players Two’s next planned move! Watch your Friends amazement as they rotate a Tile and see other Tiles TURN magically!

This build requires at the minimum for a 2-4 Player Game, 180+ meters of Filament (580grams), and around 40hrs Print Time.

Tree Supports and possibly Outer Brim required for some STLs

NOTE: The STL Models may display some artifacts from revision builds, but will not appear in Print

RECOMMEND: Allow pieces to cool to room temperature on printers Heatbed before removing to avoid warping

A .2mm to .3 Space Allowance / Tolerance was used for the .4mm Nozzle Prints


Thoren's Maze of Confusion

MazeOfConfusion_20_ConnectorGears_2.stl

Marble Tower Escape is played with up to 4 players each choosing 7 marbles of the same color. The object of the game is to have all your 7 marbles escape the Tower first. 
Players begin by choosing their 7 marbles of the same colour. Then with the youngest player going first, place one of their marbles in a vacant marble hole on the top of the Tower. Players continue placing all their marbles on the top of the tower until all marbles are in play.

Beginning with the youngest player, each player takes a turn rotating each of the Gear Levels starting with the gear closest to the top of the Tower. The first Gear is always turned clockwise turning the Gear to the next gear marker. Then the same player rotates the next gear counter-clockwise to the next gear marker. The player continues rotating each gear clockwise or counter-clockwise until all the gears have been turned once. The next player repeats the same actions rotating gears the in the same chosen direction.

Continue with the next player in the same fashion while collecting their escaped colored marbles until one player has collected all 7 marbles and is declared the winner.


STLs (Usage and Completion Time based on Bambu Labs A1 Mini)
This build requires 28 13mm Marbles consisting of 4 colors with 7 marbles of same color, 96+ metres of Filament (293grams), and around 10hrs Print Time.

Gear STLs can be Printed a different color to allow Gears stand out.

All 8 STLs were printed using 4mm Nozzle .20mm Layer Height. No Supports Required

MarbleTowerEscapeFloor.stl (1 piece) - .4mm Nozzle .20mm Layer Height - Filament 11m 33g, 1hr:21mins
MarbleTowerEscapeBase.stl (1 piece) - .4mm Nozzle .20mm Layer Height - Filament 7m 21g, 48mins
MarbleTowerEscapeTop.stl (1 piece) - .4mm Nozzle .20mm Layer Height - Filament 18m 54g, 1hr:47mins
MarbleThunderTowerEscape2Trays.stl (2 pieces) - .4mm Nozzle .20mm Layer Height - Filament 7m 22g, 36mins (Print Twice)
MarbleTowerEscapeSpacer.stl (1 piece) - .4mm Nozzle .20mm Layer Height - Filament 7.7m 23g, 48mins (Print at least 3)
MarbleTowerEscapeGear1.stl (1 piece) - .4mm Nozzle .20mm Layer Height - Filament 8m 24g, 45mins (Print at least 1)
MarbleTowerEscapeGear2.stl (1 piece) - .4mm Nozzle .20mm Layer Height - Filament 8m 24g, 45mins (Print at least 1)
MarbleTowerEscapeGear3.stl (1 piece) - .4mm Nozzle .20mm Layer Height - Filament 8m 24g, 45mins (Print at least 1)
MarbleTowerEscapeGearTEMPLATE.stl NOT PRINTED – this Template allows you to create your own Gears

NOTE: The STL Models may display some artifacts from revision builds, but will not appear in Print

RECOMMEND: Allow pieces to cool to room temperature on printers Heatbed before removing to avoid warping

A .2mm Space Allowance / Tolerance was used for the .4mm Nozzle Print


Marble Tower Escape

MarbleTowerEscapeGearTEMPLATE.stl

**Tabletop Mouse Player Token**. Size: 15mm W x 28.4mm L x 13.2mm H.

Replacement for "Mouse Trap" or Create your Own "Cheesy" Game!

Small round hole on bottom to hold a 2mm x 6mm Radius Magnet for vertical placement.

Requirements based on Bambu Lab A1 Mini

This build requires 0.4meters, 1.1grams of Filament, and around 18mins Print Time. No Supports Required.

NOTE: The STL Models may display some artifacts from revision builds, but will not appear in Print

Tabletop Mouse Player Token

GFClock_Mouse.stl

3D Printing since 2022. Tabletop gaming all my life. Pinball / Coinop junkie. NES Fan.

Enjoy creating and developing games, and 3D Printing helps ideas come to life

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

thoren66

Achievements

Seedling

Pinned models

Tabletop Mouse Player Token

Thoren's Maze of Confusion

Marble Tower Escape

Tabletop Mouse Player Token