1x1 Gridfinity block for storing up to 10 USB devices as well as 3 Micro SD cards. Simple design set up for fast printing. 

Recommended settings are as follows:

Layer Height: .32mm
Walls: 3
Infill: 10% - 20% (depending on desire)
Supports: No

Drives will sit straight up and down but are intentionally a tiny bit loose - in my experience if they are tight in the socket you end up picking up the whole block instead of the drive you want.

____________________________________________

Find all of my Gridfinity models here:

https://thangs.com/search/%22--thingymaker9000gridfinity--%22?scope=all

--thingymaker9000gridfinity--

____________________________________________

If you find these or anything else I make useful, you can buy me a beer over here:

https://www.buymeacoffee.com/thingymaker9000

Enjoy!

Gridfinity USB & Micro SD Holder

1x1 Gridfinity block for storing up to 10 USB devices as well as 3 Micro SD cards. Simple design set up for fast printing. 

Recommended settings are as follows:

Layer Height: .32mm
Walls: 3
Infill: 10% - 20% (depending on desire)
Supports: No

This is a 1x1 block for the Gridfinity system, which stores up to 9 full-size SD cards as well as 9 Micro SD cards.

I recommend printing this if you have a large amount of SD cards to store. This is not great for cards which you are using constantly, as it will get tedious to remove individual cards. This is dense storage for those of us who have lots of these cards and adapters lying around.

Print settings are as usual for my Gridfinity items:

Layer height: .24 - .32
Top / Bottom Layers + Walls: 3 - 4
Infill: 10% - 20%

Use the lower values for cheaper / faster prints; use the higher values for weightier / higher quality items. You get the idea.

____________________________________________

Find all of my Gridfinity models here:

https://thangs.com/search/%22--thingymaker9000gridfinity--%22?scope=all

--thingymaker9000gridfinity--

____________________________________________

If you find these or anything else I make useful, you can buy me a beer over here:

https://www.buymeacoffee.com/thingymaker9000

Enjoy!

Gridfinity 1x1 Dense 9 Full SD & 9 Micro SD Card Storage

This is a 1x1 block for the Gridfinity system, which stores up to 9 full-size SD cards as well as 9 Micro SD cards.

I recommend printing this if you have a large amount of SD cards to store. This is not great for cards which you are using constantly, as it will get tedious to remove individual cards. This is dense storage for those of us who have lots of these cards and adapters lying around.

Print settings are as usual for my Gridfinity items:

Layer height: .24 - .32
Top / Bottom Layers + Walls: 3 - 4
Infill: 10% - 20%

Use the lower values for cheaper / faster prints; use the higher values for weightier / higher quality items. You get the idea.

Gridfinity Dense 1x1 Full SD & Micro SD Storage

I've put together a few simple Gridfinity blocks for storage drives. A lot of us have tons of old drives sitting around - better to store them securely for future projects.

There are 3 sizes, which are as follows:

2.5" Drive Size: The main model fits 3 SSD-sized 2.5" drives (also known as laptop drives). Most traditional HDD 2.5" drives as well as virtually all SSDs will fit within the slots just fine. Its Gridfinity dimensions are 1x2x2. The slots are 7.2mm thick each.

Edit 5/23/22: Added another 2.5" option which fits older, thicker drives. The slots are 9mm.

Edit 09/03/22: Added the following sizes:

2.5in x 9mm
2.5in x 9.3mm
2.5in x 9.5mm
2.5in x 10mm

3.5" Drive Size: This model holds a single full-size 3.5" HDD. Its Gridfinity dimensions are 1x3x3. The slot is 26mm thick.

M.2 / NVME Drive Size: The final model stores M.2 or NVME sized drives. Store up to 8 within Gridfinity dimensions of 1x1x1. The slots are 3mm thick.

All of these will print just fine with the following settings:

Layer height: .24 - .32
Walls / Top / Bottom: 3
Infill: 10% - 20%
Supports: none

____________________________________________

Find all of my Gridfinity models here:

https://thangs.com/search/%22--thingymaker9000gridfinity--%22?scope=all

--thingymaker9000gridfinity--


____________________________________________

If you find these or anything else I make useful, you can buy me a beer over here:

https://www.buymeacoffee.com/thingymaker9000

Enjoy!

Gridfinity Dry Docks for Storage Drives / Hard Drives - 2.5" | 3.5" | M.2 | SSD

Gridfinity Dry Dock for Storage Drives - SSD Size Drive.stl

Gridfinity Dry Dock for Storage Drives-Full Size Drive.stl

Gridfinity M2 Storage.stl

2.5in x 9.3mm.stl

2.5in x 9.5mm.stl

2.5in x 10mm.stl

2.5in x 9mm.stl

I make stuff, mainly when I need something specific I can't find anywhere. Not the best, not the worst. Maybe something I've made will work for something you need.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

thingymaker9000

Achievements

Seedling

Fan Favorite

Novice Maker

Trailblazer