My contribution to the Easter bilby design project!
Print size at 100% is approximately 120mm or about 4.7in. Can be scaled up or down. I've printed as small as 30% with 0.1 layer height.
Printed on Ender 3v2 and Ender 2 Pro in PLA
Supports: no
Brim: no
Layer height: 0.2mm
Infill: recommend 10%
Pictured: chocolate bilby at 100%, painted and static flocked bilby at 60%, teeny orange bilby at 30%
Category:
5 Likes11 DownloadsMarch 14, 2024
5 Likes11 DownloadsMarch 14, 2024