Keyhole slots are on the back of a lot of wall mountable equipment.  These are a set of strong Keyhole Hangers for  for use with the [Multiboard](https://www.multiboard.io/) system.

I needed something a little stronger then just plastic pegs in the Keyholes.  These holders are strong and can hold a good amount of weight and pull down torque.

10mm length screws seem best.

It comes with Mid Thread and Big Thread mounts.
Mid Thread supports M3 and M4 screws.
Big Thread supports M4 and M5 screws.

There are Heatset inserts holders  and Screw holders

Heatset Inserts:
- M3 Heatset should be M3x6x5
- M4 Heatset should be M4x6x6
- M5 Heatset should be M5x6x7

[Heatset set from Amazon](https://a.co/d/4zJrDyb)

Blue Thread Lock will hold the Screws using the Heatset inserts into place.

Screw holders allow you to self tap a screw just by screwing it in.

Print as oriented with no supports and standard Multiboard settings (3 walls, 15% infill)

Multiboard Heavy Duty Keyhole Hanger

Multiboard Heavy Duty Keyhole Hanger - Mid Thread M4 Heatset.step

Multiboard Heavy Duty Keyhole Hanger - Mid Thread M4 Heatset.stl

Multiboard Heavy Duty Keyhole Hanger - Big Thread M5 Heatset.stl

Multiboard Heavy Duty Keyhole Hanger - Big Thread M5 Heatset.step

Multiboard Heavy Duty Keyhole Hanger - Big Thread M5 Screw.step

Multiboard Heavy Duty Keyhole Hanger - Big Thread M5 Screw.stl

Multiboard Heavy Duty Keyhole Hanger - Short Big Thread M5 Screw.stl

Multiboard Heavy Duty Keyhole Hanger - Short Big Thread M5 Heatset.stl

Multiboard Heavy Duty Keyhole Hanger - Short Big Thread M4 Screw.stl

Multiboard Heavy Duty Keyhole Hanger - Short Big Thread M4 Heatset.stl

Welcome to the **MULTIVERSE**!  
Bringing together two amazing organizational systems, Multiboard and Gridfinity - easy to install, incredibly strong shelves that attach with Multiboard T-Bolts!  In 4 sizes for you to explore!

**Files Included:**
**3 Shelf Sizes: 1x2 - 2x3 - 2x4 - 2x5**
Included a T-Bolt, and MultiTool (by Keep Making for convenience)

**Multiboard Printing Guidelines:**
The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. 

This object is part of **Multiboard**, a FREE "all in one" organization system with 700+ parts, that combines pegboard holes, honeycomb snaps, Gridfinity like bins, threads, brakes, and much more.

Explore and build the coolest, most adaptable workshop at [https://multiboard.io](https://multiboard.io)   

Inspired by the gridfinity baseplate from Daboo.


MultiBoard Gridfinity Shelves

MultiBoard_GridfinityShelf_2x3.stl

MultiBoard_GridfinityShelf_2x4.stl

MultiBoard_GridfinityShelf_2x5.stl

Multitool.stl

9 mm Small Thread, Flat Head, T-Bolt.stl

MultiBoard_GridfinityShelf_1x2.stl

Remix of Multiboard Ultimate Screwdriver Holder! by ReelClones

Remix of Multiboard Ultimate Screwdriver Holder!

Multiboard Space Efficient Screwdriver Holder.stl

Push fit, width is 6 hexes, each opening 15x15 mm.
Please, rotate into correct orientation before printing, which is flat side to the table, as on the picture.
If you need other size, please, leave a comment.

Small pliers, cutter holder for Multiboard

Push-fit_5cell_6hole.stl

Simple pushfit 10pc Screw Driver Holder with optional braces for larger/heavy tools. 
Fits up to ~36mm wide handles. 10mm holes. 
8x2 multiboard footprint w/braces

Multiboard Pushfit 10pc Screw Driver Holder w/brace

Multiboard 10pc holder.stl

I decided to design a bracket to hold various size screwdrivers on the multiboard.  I'm sure there are others out there.  This one works for me and I thought I'd share.

Based on Keep Makings Multiboard designs by Zack Freedman.

#Multiboard
#Multiboardmix

.2mm layer height
3 bottom, 3 top, 3 walls / perimeters.
Infill can be 15 or 20%
No supports
Bracket in photo is eSun PLA+

Multiboard ScrewDriver Bracket

Multiboard ScrewDriver Bracket\.stl

Multiboard Snaps can be pretty tight - here's a solution!  This meticulously-designed tool offers the brute force strength to pull out the most stubborn snaps!  ENJOY!

**Instructions:**
1. Screw deep into your Snap
2. Wiggle and pull!


**Print Settings:**
- 0.2mm Layer Height
- 5-6 walls loops/perimeters
- 25% Cubic Infill


Multiboard OctaPuller - Snap Removal Tool

MultiBoard-OctaPuller_Tool.stl

Store 2 pairs of scissors on your Multiboard so they're always within arm's reach.

Print upside down with no supports at 0.2mm layer height with three walls for optimal strength.
Requires 2 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard, which may be obtained from "Keep Making" on Thangs.

Multiboard Dual Scissor Holder

Multiboard Dual Scissor Holder.stl

The Multiboard Mounted 2x2 Gridfinity Baseplate is suitable for holding The Gridfinity Post-It Note Holder or any other 2x2 mounted accessory.

Print upright with no supports at 0.2mm layer height with three walls for optimal strength.
Requires 2 "9 mm Small Thread, Plain Head, T-Bolt" to mount to your Multiboard, which may be obtained from "Keep Making" on Thangs.

Multiboard Mounted 2x2 Gridfinity Baseplate

Multiboard Mounted 2x2 Gridfinity Baseplate.stl

I designed this tool holder array for holding larger pliers, wire strippers, wire crimpers and other tools securely to my multiboard withing arms reach of my workstation.

The holes are 25mm diameter and 10mm deep making it quite durable for even the heaviest tools.

In addition to printing the tool holder array, you'll need to print two 13 mm Big Thread, Flat Head, T-Bolt from Keep Making's collection to securely mount it to your Multiboard.

Print upside down. 3 walls, 0.2mm layer thickness. No supports required.

Multiboard Plier, Wire Stripper, and other Tools Holder Array

Multiboard Plier Holder Array.stl

Multiboard

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

therick

Achievements

Seedling

Voyager