tracking pixel
Stephen  L

The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP

by
thelightspd
Follow
Follow
Remix Model
thelightspd
thelightspd
|
Image 3 of 5
The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP 3d model
thelightspd
thelightspd
|
Image 3 of 5
The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP 3d model
2D
3D
Makes
The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP 3d model
The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP 3d model
The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP 3d model
The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP 3d model
The Original V6 Can Cooler - With Working Crank!!! As seen on TIKTok @LS3DP 3d model

This is the original V6 Can Cooler... This doesn't just keep your drinks cold... no no no... this also has a working Crank, that strokes the cans up and down to move that ice and cold water all around. Yep... you'll be the coolest guy with a V6 around.

Printing is fun... this just BARELY fits on a Bambu... so a Prusa is a no go... but if you have a bambu the block is a full plate build.

you do need 8 inserts 4 each for the valley pan (optional) and 4 each for the oil pan.. also 8 M3 x 10 screws to attach the oil pan and valley pan.

Once assembled insert a six pack, fill with ice and salt... give the crank... well a crank every so often and enjoy... oh and it floats in a pool. The more you seal the pan the better. Lastly when you done... do the right thing and pull the oil plug and drain it. Yes it has a drain plug in the oil pan.

Also stay tuned... a V8 modular system is coming that will be able to be printed on most printers.


188 Likes36 DownloadsMay 19, 2023


188 Likes36 DownloadsMay 19, 2023