Super Droopy, Pot, Vase - 3D printed ART

So I was playing with making pots for plants... and somehow I spent two days making this crazy thing. If you could only see the failures. lol.

This was printed on the V400 with a 0.6 nozzle.

To Print on a bambu or other printer -

EXTRUDE WIDTH - TURN TO 0.4 EVEN

TURN ON "DETECT THIN WALLS"

SPEED - EXTERNAL WALL, BRIDGE AND INNER WALL TO 10M/S

this comes in two pieces so you can set these settings on the outside only. then you can print the internal pot at regular settings.

BRING BOTH MODELS IN AT ONCE. Print slow, low temp and all the cooling.