Helldivers 2 - Autocannon and backpack bundle - High Quality 3d Print Models!

THE ONLY GOOD BUG IS A DEAD BUG!

Join the front line with this high quality Helldivers 2 Autocannon and Backpack 3D print model bundle! Save 20% off the price for both if you buy them together!

These 3D print models come separated into STLs for easy 3d printing- backpack has 32 main backpack pieces and 19 strap cover plates, and the Autocannon is in 33 pieces.

The front handle of the autocannon is functional - you will need a M4 bolt and nut to attach it to the gun, and a M4 x 40mm female chicago/binder screw with a M4 x 5mm male binder screw to attach the handle. This will allow you to use the handle when you're holding it, and for it to pivot like it does in game. You can also just glue these parts, but they won't be as strong.

The backpack model has been designed with usability in mind- there are slots and pins to allow for 38mm nylon webbing to be run as straps, and the plate covers will conceal it, while allowing flexibility. You will need 2 10mm x 78mm steel rods for the top strap connection, and sewing needle/thread to sew the strap returns back to themselves. I would also recommend some good quality epoxy glue to glue everything together for strength! If you want functional clips, you can also use 38mm webbing clips. You will also need a way to punch holes in the nylon webbing to allow for the strap covers to stay in place - or just remove the inner pins if you are fine with them sliding a little.

You will also need 2 5mm x 38mm rods for the top handle if you want it to be able to swivel.

I have also allowed for 3 8mm diameter x 5mm thickness magnets in each ammo clip and compartment, if you want them to stay removable, but these are optional.

Please note - this is not an official replica, but I do always take care to be as accurate to in game models and references as I possibly can be! The in game backpack model clips directly to the armour, so I took a little creative licensing and translated them as straps instead. If you do want to be as accurate as you can be, you could also use a 4 point harness under your armour and use 38mm nylon clips to clip directly to it!

EDIT: I have uploaded new files for the autocannon, with some fixes and some changes based on feedback I've received.

EDIT: Uploaded NEW outershell top left and top right files to fix the handle insertion. Also uploaded the handle_Flat files, if you've already printed the outershell parts - it will be static but will save reprints.