These models are admittedly niche but I made them for myself so why not share, right?

These are bins that fit into the grids of a Proslat wire mesh shelf. The bases lock into the mesh so they won't move. I've uploaded three varieties plus a FreeCAD model of a blank 5x5 bin so you can create your own version. 

Available for download:
- 5x5 bin with a 37 mm deep interior
- 5x5 three-sided bin with a 190 mm deep interior. Place two of them side-by-side to hold larger items like gloves or toques.
- 2x5 bin with a 54 mm deep interior. Great for small items like sunglasses, keys, garage door openers.
- FreeCAD model of the 5x5 bin with a blank surface. Just change the height of the first bin and then sketch on the top surface to customize it.

Bin collection for Proslat wire mesh shelves

2x5 bin.stl

Gridfinity bin for HIIJA brand crimper that I found on Amazon.
Size format is 1x4x4.

Gridfinity bin for HIIJA ethernet cable crimper

bin.stl

Gridfinity-compatible holder for Proster multimeter. Size format is 2x5x4.

Gridfinity holder for Proster multimeter

Proster multimeter.stl

Gridfinity-compatible holder for a set of SAE t-handle hex wrenches. Sizes 3/32, 7/64, 1/8, 5/32, 3/16, 7/32, 1/4. Mine are from Gearwrench but that doesn't matter at all to the design, so long as your handles are less than 23 mm wide.

Gridfinity size format is 1x4x5.

Gridfinity holder for hex key t-handle wrenches

Hex key holder.stl

Gridfinity bin for a Kobra 2 print head. It's a snug fit to stop it from moving around if you store this in a drawer. There is a built-in compartment for storing screws, silicone sleeves, and other small bits.

Size format is 2x3x6.

Gridfinity holder for Kobra 2 print head

Print Head Holder.stl

Wall mounting plate for this excellent 4 channel relay. Designed to fit a 230 mm wide print bed. In my case, I flashed it with ESPHome and using it for a garage door opener so wanted the width to hide the holes in the drywall from the OEM remote openers.

Fairly tight friction fit for the relay case so you may not need screws to fix the two together but if you want them, you can use M5 x 15 mm screws. You could also use double-sided tape. Prints without supports or a brim.

Includes a slot for the wires and a cover for that slot to hide the mess. May help to thwart nosy home inspectors. Cover is held by M1.8 screws. You will need supports when printing the cover due to the massive overhang. Might also want a brim. I did both.

Held to the wall using #8 screws and wall anchors.

I have a remix that eliminates the wire slot if you prefer that.

Wall mounting plate for Sonoff 4CH/4CHPRO

Mounting plate.stl

Mounting plate no wire slot.stl

Gridfinity-based holder for tin or aviation snips, like model 14-563 by Stanley. Others will also be compatible. To check for fitment on your snips, measure the distance from the tip to the finger rest. If it is between 150 and 165 mm, you're golden. The slot on the bottom serves two purposes:
1. Help the tool to sit level.
2. Prevent the tool from sliding if you keep it in a drawer.

Gridfinity size format is 1x5x8.

Gridfinity tin snips holder

Tin snips holder 2.stl

Bespoke wall mount for Hisense TV remote. Affixed to the wall with wall anchors or you can cut this section off in your slicer and use two-sided tape.

Wall mount for Hisense TV remote

Hisense remote.stl

Gridfinity-based holder for tools like aviation snips that are long and up to 30 mm wide. Size format is 1x4x6.

Gridfinity long tool holder

Long tool holder.stl

Gridfinity-based holder for a bottle of glue 83.5 mm in diameter, such as the 500 g bottle from CEC Corp on Amazon. Includes storage space for cap and slots for storing toothpicks or cotton swabs.

Size format is 3x3x6.

Gridfinity glue bottle holder

Glue bottle holder.stl

Box and lid to mount the the Sonoff SNZB-06P presence detector. Box cavity contains the USB cable used to power the device. Use M5x10 mm screws to affix the lid. Does not include holes for screwing the box to the mounting surface. I used double-sided tape.
Dimensions (mm): 86 H x 56 W x 34 D.

Mounting box for Sonoff SNZB-06P presence detector

Lid.stl

Box.stl

Gridfinity-compatible holder for a dual-ended razor blade scraper handle such as the Preciva model found on Amazon. Includes storage for about 220 plastic razor blades.
Gridfinity format is 2x4x6. Not stackable due to the items sitting above the top edge of the block.

Gridfinity razor scraper holder

Gridfinity razor holder.stl

Gridfinity holder for the Olfa XH-1 utility knife.
Size format is 1x5x6. Not stackable due to the knife sitting above the top edge.
Many thanks to [Stu142](https://thangs.com/designer/Stu142) for providing the FreeCAD blank format. Made this design much easier.


Olfa XH-1 holder for Gridfinity organizing system

Olfa XH-1 holder.stl

I find it a hassle to empty the waste water tray in my Miele built-in coffee maker. I designed this bin to sit under the spout when I'm running a rinse cycle to reduce the frequency of emptying the tray. The bin has a spout so if it accidentally overfills, it will drain onto the tray in a controlled fashion.

First world problems!

Size (mm): 151.2 L x 76 W x 63 H

Bin for Miele built-in coffee maker

Bin for built-in Miele coffee maker

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

theScud

Achievements

Seedling

Explorer

Debutant