After making the charcoal grill, I received a couple of comments about making a Propane Grill so I started with the tank. I believe this might be my first deck box that you might put a Burn Deck in. I've personally finally found a home for my Bosh, Iron Golem deck.

I have 2 versions in the 3mf. One with a twist on top and bottom. This requires supports but the outside comes out clean. The 2nd version is with the bottom already attached. It requires supports and the bottom of mine wasn't as clean as I would have liked. The deck compartment is 80mm in depth.

The handle to turn on the gas is just glued in place.

I have a 2nd 3mf that has the warning labels. I made these very thin so if you heat them up on the bed and pull them off and stick it straight to the cylinder they should form okay around it. Put little glue on the warning label and you should be good.

Let me know what you think about this.