Final Fantasy 8 was one of my favorite games when I was growing up. So I decided to make it and turn it into a life counter.

I printed this at .12mm layer height. On the long end this is 261mm's long. This should fit on a bed that is 220x220mm. You will just have to print each gunblade side by itself. It likely won't fit all on one plate. I printed this on my A1 combo.

Multicolor print time is approximately 3 hours.

I used 6-8mmx2mm magnets to make this work. I glued them with CA glue(Super Glue) into all the spots. You should dry fit the magnets first to make sure you have the polarity is correct. I also used the peg stl and CA glue to glue the 2 sides of the gunblade together.

I recommend washing your bed to make sure you have the best adhesion. That will be crucial to get he gunblade to not warp. I also use the super tack plate from bambu. I highly recommend.

I wanted to turn this into a deck box but I just don't think it makes sense. If you have any suggestions for making it one I would love to hear them. Commander decks are so large it makes it hard.

Let me know if you print it. I'd love to know how it turned out.

By downloading this item, you agree: 1) Not to distribute the files 2) Not to sell prints of this item. You ARE permitted to print this item as a gift. Only ThatCadCousin's and ThatCadKid's with an active Membership may print & Sell ThatCadDad items.