Magic the Gathering dropped a secret layer Deadpool. So it totally makes sense to make a deck box for him.

I did remix this from JacktheTinker over on thingiverse. https://www.thingiverse.com/thing:5525983 After looking at the model he uploaded it looked strangely familiar to Eastman's bust of Deadpool. So I looked more into Eastman's model. I'm linking it here. https://thangs.com/designer/Eastman/3d-model/Deadpool%20bust%20%28Remastered%20Supportless%20Edition%29%20%28fan%20art%29-59728

If you like this model then you may want to pop over there and give him a download or possibly subscribe to his patreon or thangs.

Anyway, as for remixing here is what I did. I pulled the model into bambu studio and cut off the body. I then scaled the head up to fit a commander deck inside. I exported the head as an stl and imported it into Fusion. In fusion I created a deck cavity, a plane to cut of the top of the head and 4 spots for magnets. I exported all of that individually and added them to blender. I boolean'd each item on the head to create all of the cavities. I then remeshed the top and the bottom of the head to get more detail. I then used the smooth and crease brushes to finish off the detail of the model.

This prints in 2 parts. It fits 100+cards. A double sleeved deck should work in here. You will need 8mmx2mm magnets. I have added some pegs if you would like to put 2 pegs in 2 of the holes to help the lid from sliding off. I'll leave that up to you. I used super glue to glue the magnets and the pegs in.