Technik G

BTT-TFT 3.5 Housing for CR-10 Smart (Pro)

by
technik.gegg
Follow
Follow
Remix Model
technik.gegg
technik.gegg
|
Image 2 of 7
BTT-TFT 3.5 Housing for CR-10 Smart (Pro) 3d model
technik.gegg
technik.gegg
|
Image 2 of 7
BTT-TFT 3.5 Housing for CR-10 Smart (Pro) 3d model
2D
3D
Makes
BTT-TFT 3.5 Housing for CR-10 Smart (Pro) 3d model
BTT-TFT 3.5 Housing for CR-10 Smart (Pro) 3d model
BTT-TFT 3.5 Housing for CR-10 Smart (Pro) 3d model
BTT-TFT 3.5 Housing for CR-10 Smart (Pro) 3d model
BTT-TFT 3.5 Housing for CR-10 Smart (Pro) 3d model
BTT-TFT 3.5 Housing for CR-10 Smart (Pro) 3d model
BTT-TFT 3.5 Housing for CR-10 Smart (Pro) 3d model
This model is restricted by licensing terms. 

This model is the top lid which can take a Bigtreetech TFT 3.5 display and is meant to replace the DWIN display that comes with the Creality CR-10 Smart (Pro) printer.

I was pretty disapointed by the controlling capabilities of the original display, so I decided to replace it with the BTT-TFT 3.5.

To make the BTT-TFT fit perfect on the original bottom part which snaps onto the printer, I designed a new top lid.

Please notice: You have to make some cutting/grinding of the original bottom part and also remove the IDC shroud for EXP3 on the BTT-TFT 3.5 (as shown in the pictures).

Also: The bottom part of the housing here is not meant for 3D printing as it may not be dimensionally accurate, except the outer dimensions, which I needed for modelling .


1 Likes22 DownloadsSeptember 8, 2022


1 Likes22 DownloadsSeptember 8, 2022
This model is restricted by licensing terms.