A fully modular 3D printed spinning display and storage system. The base rotates on standard 608 bearings, and the tower builds up in sections so you can set the height and layout to whatever you're displaying or storing.

Mix and match shelves, branches, and tower segments to build a booth display, a collection stand, a craft and supply organizer, or a workshop caddy. Add height and parts as your needs grow.

WHAT YOU NEED TO START:

• The spinning base
• The base topper (this spins and doubles as the top shelf)
• At least one tower segment (to mount branches or a shelf)

PARTS AND SPECS:

• Tower segments come in 120mm and 240mm heights
• 6 slotted sides per tower segment for mounting branches
• Circular shelves are 240mm round with 3 dividers
• Tower segments bolt together with 25mm bolts
• Base spins on standard 608 bearings (6 minimum, 14 maximum). Ungreased bearings recommended for a free spin. These are common skateboard bearings, cheap and easy to source.
• Multiple branch sizes included for different storage needs
• A blank branch is included for you to modify to your own design

BUILD EXAMPLES:

• A tall tower using four 240mm segments with branches, each holding 3 rolls of duct tape
• A compact build with two 120mm segments and 2 shelves, plus the base topper shelf, for nail and craft supplies (3 shelves total)

Height is limited mainly by what you load it with. More accessories and parts are being added regularly, so this system will keep growing.

Free for personal use. Print one for yourself, your bench, or your booth.