Modern Drawer Knob

Knob for cabinet doors or drawers - Simple and ergonomic design - no fancy theme, no sharp edges ;)

Dimensions Width: 36 mm Height: 25 mm Mounting Hole Diameter: 3.7 mm (fits M4 screws) Depth: 20 mm

Printing PLA/PLA+ works very well. This model should be printable without any support or brim. Four or more perimeters/walls may be needed - depends on layer height. I used 0.2 mm layer height for the print.

Use “Variable layer height” (Prusa Slicer) for a smoother finish.

20% Infill