Hello, and thanks for interest in this project. This adapter was designed and created myself and am freely distrubuting the idea with hopes that it will inspire some great projects; please use responibly; hope you enjoy a wonderful day and take care :) https://paypal.me/3096kit

___> 18+ years or with Parent/Gaurdian Discretion and Supervision********NOT FOR YOUNG CHILDREN*****SERIOUS RISK OF DANGER, DEATH, INJURY, OR DAMAGE IF USED INCORRECTLY OR IRRESPONSIBLY****

By downloading and using this adapter (or a 3096 Kit) your are accepting all responsibility and full liability for all actions, effects, and affects during manufature and use of this adpater (or 3096 Kit), this is to include any modifications.

Important: Below - Copy&Paste or click lnks to the URLs below to watch the Video/s; they include: important precautions, instructions, and other pertinent information.

-Assembly Instructions - https://youtu.be/VjQTX6F3oYo

-Hole Placement Jig - https://thangs.com/designer/snaktime/3d-model/3%2F4%20Inch%20PVC%20Hole%20Placement%20Jig-1561473

-3096 Kit Information - https://youtu.be/aNQcqaGd5Ss

-Remote Control Rx/Tx kit that I had used - https://www.youtube.com/watch?v=5hUZ9TYRY3w&list=LL&index=6

PATENT PENDING

NOTES BELOW:

___> 18+ years or with Parent/Gaurdian Discretion and Supervision********NOT FOR YOUNG CHILDREN*****SERIOUS RISK OF DANGER, DEATH, INJURY, OR DAMAGE IF USED INCORRECTLY OR IRRESPONSIBLY****

This adapter connects three segments of 2020 extruded aluminum at 90 deg on three axis to a 3/4" PVC pipe connection piece allowing for the creation of a modular framework that can further be developed into an remote-controlled, autonomous, structural frame, ... and the list goes on and on for the potential uses.

** Notes:

-File needs to be sliced for your printer (I used a .4 nozzle, and most default settings, except: Tree supports for 65% overhang) -I printed "upside down" (with the PVC connection end against the bed), having the supports land in that area is easier, since the tolerances are greater; the other areas should maintain as close to dims as possible). -Used M5 x 8mm button heads. -"V" or "T" Slot nuts depending on your project. -The extruded aluminum should be 5M tapped through the end (center hole, middle of cross-section) to whatever length of bolt you will be using.

** If creating a mechanical connection to the PVC utilizing the hole array:

-Holes are for a M4 x 40mm, with washers and two nuts (one locking nut); per adapter.

-Holes should be drilled through the 3/4" PVC connector 6.5mm from the connecting flat end.

___> 18+ years or with Parent/Gaurdian Discretion and Supervision********NOT FOR YOUNG CHILDREN*****SERIOUS RISK OF DANGER, DEATH, INJURY, OR DAMAGE IF USED INCORRECTLY OR IRRESPONSIBLY****