A simple pen holder I organizer. No supports, easy print. Print on the vase mode (spiralise outer contour) to save time and material.
Private use only (for commercial use please subscribe to my membership)


QUADRA PEN HOLDER I TABLE ORGANIZER

quatro.stl

This vase design is easy to print item for both standard and vase mode. Comes in 3 different wall thicknesses, so you can choose the right one for your settings. 

Fits a glass up to diameter 68 (66) mm, height 176 mm. 

Print in vase mode (spiralize outer contour) to save a bit of material and print time. If you use vase mode with 0.4 mm nozzle, I recommend setting layer width to 0.6 mm to get a bit more strength. No supports needed.

KRUHY vase

kruhy_1 mm thickness (ORIGINAL).STL

Geometric minimalist lampshade for table lamp / hanging lamp. Fits IKEA lamp stands and cords (STRALA, HEMMA, ...) or any other E27 and E14 attachments (30 mm and 40 mm).
To be printed on VASE MODE (spiralise outer contour) ONLY. Worked great on 0.3 layer height. At least 4 bottom layers are recommended. 

Gear lampshade

gear lampshade E14 30 mm.STL

Bowl / pot / planter with a rope imitating design. Final look archieved using a fuzzy skin slicer function. Scalable - original size 136x138x34 mm. 

Rope succulent planter bowl

rope_planter (1).STL

Large geometric simple planter. I recommend printing with the VASE MODE (in some slicers Spiralise outer contour,..).

Outside dimensions: diameter 158 mm (5.22 inch), height 130 mm (5.03 inch)
Inside dimensions: diameter 129 mm (5.07 inch), height 128.5 mm (5.04 inch)

Flowy planter pot

flowy_NO VASE MODE.STEP

Original vase / planter with bubbly textured surface generated by algorithm. 
Height of the model is 160 mm, but feel free to experiment with scaling and eventually vase mode. 

Drop bubbly textured vase / planter

dubliky.stl

Original vase with a folded paper like design. Works great also to be printed with the vase mode to save time. Print the original model on standard mode for increased stength. In the picture the vase is printed from wood bamboo PLA filament.



SLOZENA vase

folded.STEP

Would you like to sell any of my designs? This membership gives you access to all of my models and allows you to become a legal seller of my library for the duration of your subscription.

Commercial licence + FULL ACCESS

KAPKA - This innovative self-watering planter combines modern design with practical functionality. The planter uses a cotton rope system to adsorb water from a hidden reservoir. This water mechanism allows extended periods between waterings, perfect for busy individuals and travelers! 

Follow me on instagram for more https://www.instagram.com/simonauhrova3d/
 I am excited to see your prints!

Use ANY COTTON ROPE UP TO  6 mm diameter and place it according to the pictures provided. 

Dimensions: length 173 mm, width 120 mm, height 140 mm

You can scale the model (remember to scale both parts in the same percentage), but more significant scaling might result in too tight of too loose turning mechanism, as the clearance is designed for 100 percent scale.

To get the rough surface look on the upper part, apply fuzzy skin (slicer functionality) on the outside surfaces only. The parameters for fuzzy skin that I used were 0.4 mm thickness and 0.4 mm point distance. 

To avoid leaking, print the bottom part with at least 3-4 perimeters and 3 top and 3 bottom full layers. 

KAPKA self watering planter

Bottom.STL

Top.STL

This box set is not only cute and fun, but also practical. A great piece for your home or a perfect gift. All 3 sizes included. Easy printability.

Diameters: 135 mm, 105 mm, 75 mm

Optimized to be printed with 0.4 MM NOZZLE:
Layer height: 0.2-0.3 mm
!!Layer width (extrusion width, line width): 0.5 mm!!
Top layers: 3
Bottom layers: 3
Perimeters (wall line count): 2


TAJEMSTVI dose set 

L_bottom.STL

L_top.STL

M_bottom.STL

M_top.STL

S_bottom.STL

S_top.STL

A cute minimalist set of a tray and a little storage dose. Simple print. The handle comes separately and is simply attached by a thread. 
Print with no supports except the handle. Place the handle with bottom of the thread facing down and turn on the supports on a build plate only. 

ROYAL tray and box set

BOX.STL

COVER.STL

HANDLE.STL

TRAY.STL

Explore a new adition to the TAJEMSTVI series. A stylish and practical table organiser. Use it as a pen holder, makeup holder or to store any other items. It comes with removable dividers.

PRINT AREA REQUIRED: At 100 percent scale, you will need a print area of at least 220x220 mm. 
The model is optimized to be printed with 0.4 mm nozzle. Print on any layer height. For optimal results I recommend setting extrusion width to 0.5 mm. NO SUPPORTS.

TAJEMSTVI TABLE ORGANIZER I PEN HOLDER

LARGE.STL

LARGE_DIVIDER.STL

MEDIUM_DIVIDER.STL

MIDDLE.STL

SMALL.STL

SMALL_DIVIDER.STL

I'm Simona,  mechanical engineer who swapped gears for vases and planters. I design 3D models of house decor items - cute but useful (at least I try). Engineering may have been my first love, but designing stylish home pieces is my true passion. Welcome

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

simonauhrova

Achievements

Sapling

Up and Coming

Pinned models