This unique design box is a great choice for storing smaller items such as jewelry, hair ties, etc. 
Print WITHOUT supports

Inner space dimensions: diameter 82 mm, height 36 mm
Overall dimensions: 100 mm x 61 mm

No supports needed - turn them off. I recommend printing on max 0.2 mm layer height.

Elegance Pot jewelry box

UPDATED bottom.STEP

The bigger brothers of my popular hanging planter design available now! These big wall planters are not just scaled, but everything including wall thicknesses, tolerances, and attachment is optimized for the bigger size. 

Attachment: M5-M6 screws.

Height: 144 mm
Inside dimensions: Diameter - 123.5 mm, Height - 112.5 mm.

The original small size model to be found on my profile.

Use supports for the bodies of the planters - supports on the build plate only. 

JUMBO Wall planters

body_waves.STEP

Hanging planter pot with a dripping tray. Minimalist, modern and funky design. 

2 types of attachment: up to 25 mm wide two-sided adhesive

Inside dimensions: 
Diameter 87.6 mm
Height 95 mm


Bubbly wall planter pot 

body_UPGRADED.STEP

Microgreens hydroponic planter pot. I recommend priting from foodsafe PETG. Designed to plant popular microgreens (raddish, cabbage, brocoli, kolrabi,..) without using any soil, just water. 


NEEDED EXTRAS: spray, seeds, water

How to grow?
1. Spread the seeds on the tray evenly (do not put too much) and fill with water to the full level, so the seeds are under the water. Soak for 5-10 hours and then drain the water.
2. Fill watter so the strainer is ABOVE the water line (seeds are NOT in the water). 
3. Cover with the lid and keep covered. Wet with spray 2 times a day.
4. Uncover the lid once leaves show up. 
5. Keep uncovered and refill and change the water daily. 
6. Harvest the flowers with scissors in 5-10 days depending on the seeds.
7. Enjoy!

To get the rough walls look, I used the fuzzy skin function in the slicer (point distance 0.4, thickness 0.4)

 I printed on 0.3 layer height.



Microgreens hydroponic tray

strainer_UPGRADED(more stiff).STEP

Geometric minimalist lampshade for table lamp / hanging lamp. Fits IKEA lamp stands and cords (STRALA, HEMMA, ...) or any other E27 and E14 attachments (30 mm and 40 mm).
To be printed on VASE MODE (spiralise outer contour) ONLY. Worked great on 0.3 layer height. At least 4 bottom layers are recommended. 

Gear lampshade

gear lampshade E14 30 mm.STL

Unconventional soap holder. Modern and minimalist. With and without a dripping hole option. 

Domes Soap Holder

soap holder with hole.stl

Bowl / pot / planter with a rope imitating design. Final look archieved using a fuzzy skin slicer function. Scalable - original size 136x138x34 mm. 

Rope succulent planter bowl

rope_planter (1).STL

Full access to my STLs library.
Early design access.
EXCLUSIVE MEMBERS ONLY designs releases.
 Personal use only.

Full library access 

Unlimited monthly downloads, exclusive designs for members only and commercial licence. Would you like to sell any of my designs? This membership gives you access to all of my models and allows you to become a legal seller of my library for the duration of your subscription.

Commercial licence

KAPKA - This innovative self-watering planter combines modern design with practical functionality. The planter uses a cotton rope system to adsorb water from a hidden reservoir. This water mechanism allows extended periods between waterings, perfect for busy individuals and travelers! 

Follow me on instagram for more https://www.instagram.com/simonauhrova3d/
 I am excited to see your prints!

Use ANY COTTON ROPE UP TO  6 mm diameter and place it according to the pictures provided. 

Dimensions: length 173 mm, width 120 mm, height 140 mm

You can scale the model (remember to scale both parts in the same percentage), but more significant scaling might result in too tight of too loose turning mechanism, as the clearance is designed for 100 percent scale.

To get the rough surface look on the upper part, apply fuzzy skin (slicer functionality) on the outside surfaces only. The parameters for fuzzy skin that I used were 0.4 mm thickness and 0.4 mm point distance. 

To avoid leaking, print the bottom part with at least 3-4 perimeters and 3 top and 3 bottom full layers. 

KAPKA self watering planter

Bottom.STL

Top.STL

A cute minimalist set of a tray and a little storage dose. Simple print. The handle comes separately and is simply attached by a thread. 
Print with no supports except the handle. Place the handle with bottom of the thread facing down and turn on the supports on a build plate only. 

ROYAL tray and box set

BOX.STL

COVER.STL

HANDLE.STL

TRAY.STL

Explore a new adition to the TAJEMSTVI series. A stylish and practical table organiser. Use it as a pen holder, makeup holder or to store any other items. It comes with removable dividers.

PRINT AREA REQUIRED: At 100 percent scale, you will need a print area of at least 220x220 mm. 
The model is optimized to be printed with 0.4 mm nozzle. Print on any layer height. For optimal results I recommend setting extrusion width to 0.5 mm. NO SUPPORTS.

TAJEMSTVI TABLE ORGANIZER I PEN HOLDER

LARGE.STL

LARGE_DIVIDER.STL

MEDIUM_DIVIDER.STL

MIDDLE.STL

SMALL.STL

SMALL_DIVIDER.STL

BEDLA table lamp is a unique and simple to assemble table light. It uses standard E14 light cord with a lampshade ring (almost any E14 light cord, I used IKEA Strala). The file includes a complete tutorial for a vase mode and Fuzzy skin settings to archieve the best result. 

BEDLA table lamp

cover.STL

lampshade.STL

stand.STL

stand_fuzzy skin modifier_see README.3MF

washer.STL

I'm Simona,  mechanical engineer who swapped gears for vases and planters. I design 3D models of house decor items - cute but useful (at least I try). Engineering may have been my first love, but designing stylish home pieces is my true passion. Welcome

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

simiu

Achievements

Sapling

Fan Favorite

Explorer

Pinned models