Large geometric simple planter. I recommend printing with the VASE MODE (in some slicers Spiralise outer contour,..).

Outside dimensions: diameter 158 mm (5.22 inch), height 130 mm (5.03 inch)
Inside dimensions: diameter 129 mm (5.07 inch), height 128.5 mm (5.04 inch)

Flowy planter pot

flowy_NO VASE MODE.STEP

Original vase with a folded paper like design. Works great also to be printed with the vase mode to save time. Print the original model on standard mode for increased stength. In the picture the vase is printed from wood bamboo PLA filament.



SLOZENA vase

folded.STEP

Full access to my STLs library.
Early design access.
EXCLUSIVE MEMBERS ONLY designs releases.
 Personal use only.

Full library access 

Unlimited monthly downloads, exclusive designs for members only and commercial licence. Would you like to sell any of my designs? This membership gives you access to all of my models and allows you to become a legal seller of my library for the duration of your subscription.

Commercial licence

KAPKA - This innovative self-watering planter combines modern design with practical functionality. The planter uses a cotton rope system to adsorb water from a hidden reservoir. This water mechanism allows extended periods between waterings, perfect for busy individuals and travelers! 

Follow me on instagram for more https://www.instagram.com/simonauhrova3d/
 I am excited to see your prints!

Use ANY COTTON ROPE UP TO  6 mm diameter and place it according to the pictures provided. 

Dimensions: length 173 mm, width 120 mm, height 140 mm

You can scale the model (remember to scale both parts in the same percentage), but more significant scaling might result in too tight of too loose turning mechanism, as the clearance is designed for 100 percent scale.

To get the rough surface look on the upper part, apply fuzzy skin (slicer functionality) on the outside surfaces only. The parameters for fuzzy skin that I used were 0.4 mm thickness and 0.4 mm point distance. 

To avoid leaking, print the bottom part with at least 3-4 perimeters and 3 top and 3 bottom full layers. 

KAPKA self watering planter

Bottom.STL

Top.STL

A cute minimalist set of a tray and a little storage dose. Simple print. The handle comes separately and is simply attached by a thread. 
Print with no supports except the handle. Place the handle with bottom of the thread facing down and turn on the supports on a build plate only. 

ROYAL tray and box set

BOX.STL

COVER.STL

HANDLE.STL

TRAY.STL

Explore a new adition to the TAJEMSTVI series. A stylish and practical table organiser. Use it as a pen holder, makeup holder or to store any other items. It comes with removable dividers.

PRINT AREA REQUIRED: At 100 percent scale, you will need a print area of at least 220x220 mm. 
The model is optimized to be printed with 0.4 mm nozzle. Print on any layer height. For optimal results I recommend setting extrusion width to 0.5 mm. NO SUPPORTS.

TAJEMSTVI TABLE ORGANIZER I PEN HOLDER

LARGE.STL

LARGE_DIVIDER.STL

MEDIUM_DIVIDER.STL

MIDDLE.STL

SMALL.STL

SMALL_DIVIDER.STL

BEDLA table lamp is a unique and simple to assemble table light. It uses standard E14 light cord with a lampshade ring (almost any E14 light cord, I used IKEA Strala). The file includes a complete tutorial for a vase mode and Fuzzy skin settings to archieve the best result. 

BEDLA table lamp

cover.STL

lampshade.STL

stand.STL

stand_fuzzy skin modifier_see README.3MF

washer.STL

I'm Simona,  mechanical engineer who swapped gears for vases and planters. I design 3D models of house decor items - cute but useful (at least I try). Engineering may have been my first love, but designing stylish home pieces is my true passion. Welcome

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

simiu

Achievements

Sapling

Fan Favorite

Explorer