CoD_MWII_Ghost_Mask

Remixed a model from Serhero on thingiverse. Smoothed edges, reworked reliefs, add some extra bulk around the eyes for support when actually wearing it. Ask if you have any specific questions on parameters or design changes!

Printed it vertically on a Longer LK5 Pro Specs:

• PEI steel bed at 65C, nozzle 207C Initial layer 65/210C respectively.

• Layer Height 0.15

• 10% infill / Gyroid

• Speed 60 / infill 65 / outer wall 35 / inner wall 40

• Travel speed 180

• Tree supports everywhere

• 8mm Brim (needed for supports to stick)

• Wall Line Count = 3

• Outside to Inside walls

• Z Seam Align = Sharpest Corner/Smart Hiding

• 5 top/bottom layers/Lines/0.75 thickness