Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4153501.

Duet 2 wifi case for a Prusa i3 clone.
This case was drawn from scratch in Fusion 360 and was inspired from work done by 
https://www.thingiverse.com/thing:2812834
https://www.thingiverse.com/thing:3356858
https://www.thingiverse.com/thing:3789563

I have not printed this so have not tested for fit.
Fusion360 file is included

The case is mounted to the printer from at 4 points, 2 at the near the bottom which go into the 3030 extrusion using t-nuts. The other  2 are on the right hand side of the case and will need a M3 bolt to screw into the vertical aluminium frame.

There is space for 40x10m fan at the bottom of the case, the lid is to be held on by M3 bolts going into brass inserts in the bottom section of the case.
There is also 2 mounting post at the bottom of the case for a buck converter. https://www.amazon.co.uk/gp/product/B07Q9PVQ7M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Update 09/02/2020
Added version 2 of the base with a 0.5mm clearance on the base for the lid.

Update 10/02/2020
added version 3 of the base stl with enlarged cable routing holes near the base of the case to allow routing of cables with plugs attached.

Update 11/02/2020
Old files removed and updated files added including .step files for base and lid.
Additional cut out added to base to accommodate the frame end plate.

Update 22/02/2020
Added 2 holes to the right side of the cooling duct to allow easier fitting of the 2 bolts to vertical frame

Prusa i3 clone Duet 2 wifi case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4203838.

A case and mount for a PanelDue 5i clone to fit on top of a Prusa I3 frame.
This is for a Fysetc 5i Clone PanelDue. Th front half of the case used can be found here
https://www.thingiverse.com/thing:3853309

I have made a back panel to fit that bolts to a frame mount. the mount was inspired by https://www.thingiverse.com/thing:3286954 mount.

The back panel has a hole to fit the 4 pin cable through.

 

Prusa PanelDue mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4142068.

SDS drill bit holder that fits into a Makita  MakPac4 case in a empty battery slot.
Print with a TPU filament, 10% infill and 2 shells for the wall. 

SDS drill holder for Makita MakPac 4 case

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4140297.

Remix of https://www.thingiverse.com/thing:3329838/files by Frio.
Removed the power switch and modified the front panel to accommodate a fused switch socket. The PSU bottom cap has also been modified for the increased depth of the switch. I have included the modified Fusion360 file. 


The socket that was used is this one https://www.amazon.co.uk/gp/product/B07RRY5MYZ/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

update (03/02/2020)
Added stl for cover and bottom cap for horizontal orientation of socket giving more clearance for connecting the lead to the power supply 




Prusa MK3 Mean Well LRS-350 Specific Mount with Fused Switch

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4575920.

Replacement coupler for Braun blender.
Fusion file included if it needs to be modified.
printed with 5 perimetrs (solid) for strength.



Braun blender coupler

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4578731.

Dewalt airlock hose connector. Fusion360 file included to allow size to be modified for different size tools.

Printed in PLA with 100% infill, or you can use multiple shells for faster print

Dewalt Air lock adapter

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

shicks101

Achievements