Light holder for the Raleno S116 light. This holder clips into the IKEA Skadis board and can be adjusted with a ball joint.

I've used two universal hooks from CSD_Salzburg (https://www.thingiverse.com/thing:2853257). They clip into the base and attach securely to the Skadis board without wobble.

A M5x12 screw and nut attaches the ball joint to the light grip. Supports are needed for the overhanging clips of the light holder.

SKADIS Light Holder

Ball & Light Holder

Screw

Skadis Base

A GridFinity box to hold 608ZZ and similar ball bearings (22 diameter, 7mm width). The box can hold up to 15 bearings in three staggered rows. This makes it easy to access the bearings and stops them from moving around when opening a drawer.

This item is for use with the #GridFinity system by Zach Freedman:

https://www.youtube.com/watch?v=ra_9zU-mnl8

Gridfinity Ball Bearing Box

Ball Bearing Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5362022.

Cable clips to hide several cables behind the corner of my IKEA Skadis board. I've attached multiple things to the board (lights, Sonos & chargers) and wanted to route the cables out of sight. Unfortunately, the slots of Skadis are too narrow to get usb cables through, so I had to route the cables along the corner of the board.

The clips should fit multiple cables, I've currently have only three attached. The clips are also easy to attach and hold the cables secure in place.

SKADIS cable clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5318006.

Headphone and microphone holder for the IKEA Skadis board for my Cloud Alpha HyperX gaming headset. I was looking for a headset holder that can store the mic as well when I'm not using it but did not find one that fit my criteria.

The headphones have a bit of clearance to the board without too big of a holder.

I've used the universal hooks and printed the holder without supports. After I took the pictures, I've reduced the grip distance for the mic slightly (5mm vs 6mm) because the microphone was held a bit loose.

SKADIS Headphone & Mic holder

Headphone & Mic holder

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

sdfx

Achievements

Seedling

Fan Favorite

SKADIS Light Holder

Gridfinity Ball Bearing Box

SKADIS cable clip

SKADIS Headphone & Mic holder