Voidkitty Dice Tower & Dice Flask *Personal Use*

August 2024 Voidkitty Dice tower & Dice flask Personal Use

Important when buying the design: This is my design and copyright to sassiecat3d, it's not to be used commercially or resold/remixed without my permission. The STL/3mf files are under the same clause, not to be re-sold/remixed or use commercially without my permission. You are welcome to contact me if you would like to know more. You agree to these terms when you purchase this file.

The voidkitty prints well down to 60% in size. The dice flask and dice tower is testprinting well at 80% but should be able to print down lower in %.

This file contains: Dice tower flask and 3mf voidkitty flexi and 3mf dice flask (thick walls) and 3mf dice flask (thin walls for faster printing) and 3mf dice flask top

3D PRINTING SETTINGS

I used a .4mm nozzle, .2mm layer height, I use 5% infill. Make sure your printer is all set with a good calibration and retraction before printing it.