Introducing Oak, the majestic Fall Dragon Wand! After bringing this stunning dragon to life, I had the idea to transform it into a wand.
After some experimentation, I decided on a three-part design for easy printing and assembly. Just a tip: be sure to use supports on the head part, as it prints upright.
We printed them at 55% and 70% in size and they fit an adult and child's hand well at those sizes.
This marks the final piece in the Fall Dragon series—for now! 🐉🍂
Important when downloading/buying the design:
This is my design and copyright to sassiecat3d, it's not to be used commercially or resold/remixed without my permission.
The STL/3mf files are under the same clause, not to be re-sold/remixed or use commercially without my permission.
You are welcome to contact me if you would like to know more on sassiecat3d@gmail.com
You agree to these terms when you download this file.
3D PRINTING SETTINGS: I used a .4mm nozzle, .2mm layer height, I use 5% infill. Make sure your printer is all set with a good calibration and retraction before printing it.