Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4532734.

Radio Clock Cover A case for installing a radio-controlled watch for a car. details

1. Please output the STL that matches the size of the watch. STL is a set of base, cover and visor.

• Normal Ver RadioClock2_*.stl

• ShortWidth Ver RadioClock2Short_*.stl

ABS filament is recommended when installed in the car (on the dashboard) as it will be hot.

2. Adjust so that the connection hole between the base and cover is inserted.

3. Attach the watch to the base. Use the mounting bracket if it is included. If necessary, make a hole in the mounting bracket and screw it in. (M3, pan head screw, length=10~20mm, washer)

4. Wrap the excess wiring around the guide and pull it out from the center. If necessary, insert the insulock through the hole to secure it.

5. Complete with cover and visor attached.

6. When installing on the dashboard, lay a rubber sheet etc. so that it will not slip.

Attachable watch

(Some processing may be required.)

• Normal Ver(RadioClock2_*.stl)

  • SEIWA W852
  • NAPOLEX Fizz-890
  • etc.

• ShortWidth Ver(RadioClock2Short_*.stl)

  • NAPOLEX Fizz-1083
  • KASHIMURA AK-195
  • etc.