Hiya, this is just a Makercoin but without the logo so that you can either print like this or customise.

Maker Coin

Maker Coin.stl

Hiya,
This is just a simple Milling tool I modelled when I was learning fusion 360, I've only recently found it from looking through my archive.
Thanks,

Milling Cutter

milling cutter 5mm.stl

**********READ BEFORE MAKING*********

 

Hello, thanks for clicking on my design. To start with, the project does require parts I will include a parts list.

Secondly, some parts need glueing together. I used two-part epoxy, and the Hull for the project needs gluing together then the Rim needs gluing on top of that. If needed, I’ve included photos to use as a reference.

Holes need to be drilled in the back for the prop shaft. They’re not in the files because I don’t know what prop shaft you’re going to use or how far apart the propellers will be.

I will post updates to this design to add a lid to the top later.

RC Boat -Work in Progress-

Hull Front.3mf

Hi, all this is just a simple retraction test I threw together. 

When printing, it's best to start on a lower retraction value and build your way up slowly by something like 0.2mm each time, bearing in mind the max retraction you can get away with on your machine. For example, if I go above about 1.5mm, I seriously risk damaging my printer because it's sporting an all-metal and is direct drive. If you get to a high retraction setting, it's best to look into other settings, like combing mode, to see if your problem is something else.

Print settings:

0.2mm layer height

100% infill

Retraction Test For 3D Printing

Retraction Test.stl

This is my version of the assassin's creed wrist blade at the moment I'm trying to figure out a spring mechanism for it.
THIS IS A WORK IN PROGRESS.

Assasins Creed v8.stl

Hi all, this is my design for Tony Starks Mk1 Ark Reactor. I don't have a 3D Printer so I cant suggest any settings but if anyone does make this please let me know down in the comments with any suggestions.

Starks arc reactor mk1.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

samuelm1413362

Achievements

Seedling

Debutant